Jump to content
SAU Community

Recommended Posts

Nismo 740s are 16600-RR544

Looks like you might have "Jecs" injectors which are OEM or copied Jecs injectors remanufactured to different flow rates.

These have a poor reputation so will be interesting to see how they bear up in testing (and in tuning).

score! don't forget to get the lag times....you'll need them when for when you tune.....I'd advise you to put them straight in after the cleaning and flowing as mine got stuck after not putting them in after a full bench flow and test and multiple ultrasonic baths...I only waited 2 months.

Nismo 740s are 16600-RR544

Looks like you might have "Jecs" injectors which are OEM or copied Jecs injectors remanufactured to different flow rates.

These have a poor reputation so will be interesting to see how they bear up in testing (and in tuning).

I'm running some of those remanufactured 850s from tlf performance. it goes on the dyno tomorrow....hoping for the best.

You just can't explain it to some people Ben, the extra time required to set the idle on the dyno, mucking around with lag times to get them feeling good, the hassle is, there is no way to know if they are all similar.

Remanufactured means some company took your stock injectors, ran a drill through them, cleaned them then sold them back for more than a new set of Xspurts would cost. I just don't get it...

You just can't explain it to some people Ben, the extra time required to set the idle on the dyno, mucking around with lag times to get them feeling good, the hassle is, there is no way to know if they are all similar.

Remanufactured means some company took your stock injectors, ran a drill through them, cleaned them then sold them back for more than a new set of Xspurts would cost. I just don't get it...

they idle fine if you get your lag time right in your corrections....thats why its important to know.....and i get about 400+km to a tank. i'm pretty pleased i didn't piss $1000 up against the wall when there are injectors out there that will do the job for a third the price.

Badgaz, a shit spray pattern is still a shit pattern. And compared to modern injectors the pattern of drilled injectors is terrible.

Maybe you get away with it for around 700cc or less but bigger than that idle is way harder to get nice, and economy will suffer. If you compared to decent injectors you would realise straight away.

You do however get an acceptable result with drilled injectors if you don't know any better though. They will make same power on a dyno and that seems to be the only thing people care about.

they idle fine if you get your lag time right in your corrections....thats why its important to know.....and i get about 400+km to a tank. i'm pretty pleased i didn't piss $1000 up against the wall when there are injectors out there that will do the job for a third the price.

A good tuner doesn't need lag time guesses from the manufacturer, they work it out initially during the first part of the tune. The problem comes when there are differences between each injector's lag time, as there is no way the tuner can compensate or even know.

If you are paying 1k for injectors you are getting ripped. I can sell Xspurt 1000's for $600. Top feed rails are $100 from Goodies direct... The Nismo's are closer to that 1k price, only due to the name.

A good tuner doesn't need lag time guesses from the manufacturer, they work it out initially during the first part of the tune. The problem comes when there are differences between each injector's lag time, as there is no way the tuner can compensate or even know.

If you are paying 1k for injectors you are getting ripped. I can sell Xspurt 1000's for $600. Top feed rails are $100 from Goodies direct... The Nismo's are closer to that 1k price, only due to the name.

yes agreed there is the theoretical world and the real world...my lag values had a correction of 0.29 at 14volts from the manufacturer....it idled a little crappy and i adjusted the correction to 0.31 and it idles perfect....just like they were suppose to be 850's but i'm working off a correction factor that is 52% which puts them around 750cc. 1k is what we'd pay over here in NZ for a set of 740's.

yes agreed there is the theoretical world and the real world...my lag values had a correction of 0.29 at 14volts from the manufacturer....it idled a little crappy and i adjusted the correction to 0.31 and it idles perfect....just like they were suppose to be 850's but i'm working off a correction factor that is 52% which puts them around 750cc. 1k is what we'd pay over here in NZ for a set of 740's.

You can get IDs for less but I'll just get my next set of injectors off Scotty.

Just to close this thread out, picked them up today. They have been drilled/flowed what ever they are!! Flow ended up being 800, well 790mil. So enough for what i need. Pritty happy to be honest. The guy that gave them a service replaced all the O rings etc and said the spray pattern was spot on

Fair enough, spot on was my wording. He said they had a good consistent spray pattern. Translate that into injector service technician speak and you have the correct wording

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...