Jump to content
SAU Community

Recommended Posts

I think both sides (talking globally here; not talking about people in this thread) have an arrogance that pisses each other off.

Cyclists that flaunt themselves on the road, taking liberties just to piss people off, and motorists that think the world revolves around them (ahem mums on the school run....) and nothing should ever get in their way.

Sounds to me like Daleo is a good example of a responsible cyclist, he isn't going to be the one taking up a whole lane on a single lane road, he'll wave you past when it's safe to do so. In turn, and in respect of that, I'd pass him giving him as much room as I safely can. That's all that needs to happen.

  • Like 2

I think both sides (talking globally here; not talking about people in this thread) have an arrogance that pisses each other off.

Cyclists that flaunt themselves on the road, taking liberties just to piss people off, and motorists that think the world revolves around them (ahem mums on the school run....) and nothing should ever get in their way.

Sounds to me like Daleo is a good example of a responsible cyclist, he isn't going to be the one taking up a whole lane on a single lane road, he'll wave you past when it's safe to do so. In turn, and in respect of that, I'd pass him giving him as much room as I safely can. That's all that needs to happen.

this.

and when I ride, I keep to the opposite side, so I can see on coming traffic.

I ride on the road(when no brake down/bike lanes are available), and move onto the mud/grass/gravel when a car does approach.

I want to see them coming.

that way, I can react accordingly.

I also dont wear a helmet (lets not get into that debate atm), and have never been booked for not.

but...

if I do get booked, my reaction will be taking an entire lane the entire trip.

because, thats the law....

dont ride much anymore, so doubt it will ever happen.

aaand, go...

this.

and when I ride, I keep to the opposite side, so I can see on coming traffic.

I ride on the road(when no brake down/bike lanes are available), and move onto the mud/grass/gravel when a car does approach.

I want to see them coming.

that way, I can react accordingly.

I also dont wear a helmet (lets not get into that debate atm), and have never been booked for not.

but...

if I do get booked, my reaction will be taking an entire lane the entire trip.

because, thats the law....

dont ride much anymore, so doubt it will ever happen.

aaand, go...

How is your crank bearing....?

Here's an interesting article from the US about the "Idaho Stop".
http://www.vox.com/2014/5/9/5691098/why-cyclists-should-be-able-to-roll-through-stop-signs-and-ride

It proposes some constructive solutions for getting bicycles off high traffic thoroughfares, which would be a win for both sides of the argument.

Not trying to inflame the situation, but there is some useful info in there, and the rule (or a version of it under a different name) has been in use in states across the US with fewer negative outcomes than the status quo.

Here's an interesting article from the US about the "Idaho Stop".

http://www.vox.com/2014/5/9/5691098/why-cyclists-should-be-able-to-roll-through-stop-signs-and-ride

It proposes some constructive solutions for getting bicycles off high traffic thoroughfares, which would be a win for both sides of the argument.

Not trying to inflame the situation, but there is some useful info in there, and the rule (or a version of it under a different name) has been in use in states across the US with fewer negative outcomes than the status quo.

Yeah, apparently cars are exempt from the laws of physics. Spot that line in there?

Frankly, I didn't think it was a very well written article, and it didn't sway my opinion that it is safer to have enforced stop and red lights.

If governments were serious about reducing carbon emissions, they wouldn't be installing traffic calming devices, red lights etc etc all the time. Imagine the carbon footprint of a new set of traffic lights over its lifetime?!

But that's ok, cause the government gets the cash from the fuel excise.... :/

Did you see the main point in there? Bicycles don't trigger the light circuit, so the lights will never change. I am sure many of the motorcyclists amongst us have blown a red for that very reason. I know I have had to many times over the years. Does this make me a criminal worthy of being stoned with spark plugs? Farkin wanker...

"Several states have similar "Dead Red" laws, which lets cyclists (and motorcyclists) ride through a red light if there's no traffic, if the cyclists have stopped for set periods of time, and if the light isn't changing because its sensor doesn't register bikes."

Yes, I can see that, after stopping for a set amount of time, the cyclist can proceed through the intersection. They might also be able to use that magical button on the side of most traffic lights that turns them red to allow people to cross... ;)

Anyway, thanks, when did I ever say I chuck plugs at cyclists....? I thought my posts were pretty neutral....

Wanker comment was directed at the bloke suggesting it.

Cyclists aren't allowed on the footpath, and quite often are clipped into their pedals. Magical button? It's for pedestrians. Yet again, there are no facilities for cyclists in most cases. These would need to be included in any bike rego process.

Wanker comment was directed at the bloke suggesting it.

Cyclists aren't allowed on the footpath, and quite often are clipped into their pedals. Magical button? It's for pedestrians. Yet again, there are no facilities for cyclists in most cases. These would need to be included in any bike rego process.

Carry a broom stick to push said button? :P

Then you can bash arsehole drivers who try to clip you, and also have a jousting session when you get to two lane bike paths! :D

  • Like 2

Bicycle jousting is the best solution this thread has produced.

Nice work Luke!

Brb, off to get a broomstick.

It wasn't saying that cars expend no energy to get moving from a standstill, just that the driver isn't the one physically getting the car moving again; unlike the bicycle.

Bicycle jousting is the best solution this thread has produced.

Nice work Luke!

Brb, off to get a broomstick.

It wasn't saying that cars expend no energy to get moving from a standstill, just that the driver isn't the one physically getting the car moving again; unlike the bicycle.

twasnt my idea, but I like it.

You shall be forced to mount the toddler tricycle for the first round of bicycle jousting.

Mmm K?

Nay, I shall be astride the toddlers balance bike.

Yea verily; it has newfangled yellow plastic wheels, and an ooga horn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...