Jump to content
SAU Community

Recommended Posts

It's been done before, I'm sure. Have a search on here, I know at least one person has looked into it before. From memory the R34 6speed needs a custom length tailshaft made up, and there might be a bit more custom work.

Gearbox mounts will be different - prop shaft will need work - you will need the ECU AND internal wiring loom that plugs into ECU , and the under bonnet wiring loom from R34 GTR as there are pin differences ! , the ECU from 34GTR will not fit Stagea ECU plug , GTR is blue plug and Stagea grey - you will need a bigger fuel pump - AND YOU WILL NEED BETTER BRAKES !!! MY GTR BRAKES WITH PROJECTMU PADS ARE STILL NOT ENOUGH !!

Here in UK we have a V8 Stagea - a 2.8 HKS stroker and a stock gearboxed 500BHP RB25DET - + some Autec`s

Its all been done before XCEPT 6 speed as far as i know ...

Gearbox mounts will be different - prop shaft will need work - you will need the ECU AND internal wiring loom that plugs into ECU , and the under bonnet wiring loom from R34 GTR as there are pin differences ! , the ECU from 34GTR will not fit Stagea ECU plug , GTR is blue plug and Stagea grey - you will need a bigger fuel pump - AND YOU WILL NEED BETTER BRAKES !!! MY GTR BRAKES WITH PROJECTMU PADS ARE STILL NOT ENOUGH !!

Here in UK we have a V8 Stagea - a 2.8 HKS stroker and a stock gearboxed 500BHP RB25DET - + some Autec`s

Its all been done before XCEPT 6 speed as far as i know ...

Thank you very much!

Big project...A lot of work need to do, if put the GTR engine in stagea.

I though just change the engine and Gearbox + some more.

The 6 speed is easy, but why would you want to get rid of VCT? You need every bit of response you can get in these heavy wagons. The RB25neo is a better engine overall.

Did you mean Rb25neo change the 5 speed greabox to 6 speed??

RB owners will not be impressed with the fitting of a 26 in a stagea ! , as stated the NEO25 is a far superior engine when tuned - fitting twin turbo`s and a 6 speed gearbox is worth a silent nod !

a rear wheel drive stagea with over 250whp that can be driven in the wet and not crashed would also be impressive

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...