Jump to content
SAU Community

Recommended Posts

I own an auto 1998 r34 gtt and I'm thinking about getting a larger turbo (roughly 350 hp rated). With manual cars the clutch would need to be upgraded but would anything need to be upgraded with an automatic ??

Any replies will be greatly appreciated

Cheers, angelo

Yes, you need a shift kit and a transmission cooler for that sort of power.

What sort of turbo is it? Usually people say the brand or part number, not just the power it can make. I hope this isn't an ebay chinese copy of a real turbo...

Okay thanks for that , really appreciated ! :)

And I'm not sure yet. It's out of some guys totalled gtst who said it was making that much power. It's a gumtree add and I'm trying to figure out weather to buy it or not. It sounds like it's the stock turbo high flowed but I'm not 100% sure

Okay thanks for that , really appreciated ! :)

And I'm not sure yet. It's out of some guys totalled gtst who said it was making that much power. It's a gumtree add and I'm trying to figure out weather to buy it or not. It sounds like it's the stock turbo high flowed but I'm not 100% sure

I don't like buying S/H turbos unless I can hear them running, but if it's stacked at least there is a legitimate reason for selling.

Depends where you go, MV Automatics in Adelaide apparently do a valve body swap service if you are mechanically minded, or get your mech to look into it? If you had a location I could possibly help more.

At a guess, the shift kit would cost $600 - $1200 fitted including fluids.

A trans cooler is $100 odd and can easily be mounted by removing the front bar. You should be able to manage that yourself, or find a handy mate and offer him bourbon.

I'm in Perth. Also thank you so much for all the help !!!

Also even if the turbos broken I don't mind. The guy doesn't know too much about cars and he's selling me the turbo, some injectors and an electronic boost controller for $400. Bargain of the year :D

I'm in Perth. Also thank you so much for all the help !!!

Also even if the turbos broken I don't mind. The guy doesn't know too much about cars and he's selling me the turbo, some injectors and an electronic boost controller for $400. Bargain of the year :D

So you'll need an aftermarket ecu or Nistune chip at least, a bigger AFM, possibly some oil and water lines and new exhaust and preferably a manual conversion!
  • 1 month later...

also price for shift kit varies bepending on brand and if yo want a stage 1, 2 or 3 ect but just for a rough base line a stage 2 shiftkit for my old 31 skyline auto cost me 1290 fitted

I have gone from the standard shift kit to pretty much everything you can do to a R34, and the difference is beyond night and day. Absolutely absurd. I drove a stock one and almost laughed myself off the road.

You have two options

1) Stick with and upgrade the auto (no one really does this long term other than stupid me)

2) Go manual

I entirely understand why people driving stock Skylines pretty much go LOLZ AUTO LOLOLOLOLOLOOLO.

Talk to mv autos in Adelaide. I had a 34 box built full manual valve body converter etc for under $4000.

Manual valve bodies are absolute crap compared to an aftermarket programmable transmission controller. ;)

  • 1 month later...

I ran 200rwkw through the Tiptronic and it was fine-ish. Then went 260rwkw+ and it was s__thouse -> converted to manual.

I'd suggest doing the shift kit early, should make the box last a bit longer. And the cooler. Plus anything else Scotty and Greg recommend.

(Also if you're spending little money on the turbo you will end up spending much bigger money on everything else around it. There's no cheap way out, really.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...