Jump to content
SAU Community

Urgent: Do I Need To Upgrade My Auto Transmission When Upgrading Performance

re34perGTT
 Share

Recommended Posts

re34perGTT Community Regular

re34perGTT

Posted
Posted

I own an auto 1998 r34 gtt and I'm thinking about getting a larger turbo (roughly 350 hp rated). With manual cars the clutch would need to be upgraded but would anything need to be upgraded with an automatic ??

Any replies will be greatly appreciated

Cheers, angelo

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Yes, you need a shift kit and a transmission cooler for that sort of power.

What sort of turbo is it? Usually people say the brand or part number, not just the power it can make. I hope this isn't an ebay chinese copy of a real turbo...

re34perGTT Community Regular

re34perGTT

Posted
  • Author
Posted

Okay thanks for that , really appreciated ! :)

And I'm not sure yet. It's out of some guys totalled gtst who said it was making that much power. It's a gumtree add and I'm trying to figure out weather to buy it or not. It sounds like it's the stock turbo high flowed but I'm not 100% sure

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Okay thanks for that , really appreciated ! :)

And I'm not sure yet. It's out of some guys totalled gtst who said it was making that much power. It's a gumtree add and I'm trying to figure out weather to buy it or not. It sounds like it's the stock turbo high flowed but I'm not 100% sure

I don't like buying S/H turbos unless I can hear them running, but if it's stacked at least there is a legitimate reason for selling.

Depends where you go, MV Automatics in Adelaide apparently do a valve body swap service if you are mechanically minded, or get your mech to look into it? If you had a location I could possibly help more.

At a guess, the shift kit would cost $600 - $1200 fitted including fluids.

A trans cooler is $100 odd and can easily be mounted by removing the front bar. You should be able to manage that yourself, or find a handy mate and offer him bourbon.

re34perGTT Community Regular

re34perGTT

Posted
  • Author
Posted

I'm in Perth. Also thank you so much for all the help !!!

Also even if the turbos broken I don't mind. The guy doesn't know too much about cars and he's selling me the turbo, some injectors and an electronic boost controller for $400. Bargain of the year :D

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I'm in Perth. Also thank you so much for all the help !!!

Also even if the turbos broken I don't mind. The guy doesn't know too much about cars and he's selling me the turbo, some injectors and an electronic boost controller for $400. Bargain of the year :D

So you'll need an aftermarket ecu or Nistune chip at least, a bigger AFM, possibly some oil and water lines and new exhaust and preferably a manual conversion!
  • 1 month later...
scithe93 Contributor

scithe93

Posted
Posted

also price for shift kit varies bepending on brand and if yo want a stage 1, 2 or 3 ect but just for a rough base line a stage 2 shiftkit for my old 31 skyline auto cost me 1290 fitted

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

I have gone from the standard shift kit to pretty much everything you can do to a R34, and the difference is beyond night and day. Absolutely absurd. I drove a stock one and almost laughed myself off the road.

You have two options

1) Stick with and upgrade the auto (no one really does this long term other than stupid me)

2) Go manual

I entirely understand why people driving stock Skylines pretty much go LOLZ AUTO LOLOLOLOLOLOOLO.

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Talk to mv autos in Adelaide. I had a 34 box built full manual valve body converter etc for under $4000.

Manual valve bodies are absolute crap compared to an aftermarket programmable transmission controller. ;)

  • 1 month later...
V28VX37 Veteran

V28VX37

Posted
Posted

I ran 200rwkw through the Tiptronic and it was fine-ish. Then went 260rwkw+ and it was s__thouse -> converted to manual.

I'd suggest doing the shift kit early, should make the box last a bit longer. And the cooler. Plus anything else Scotty and Greg recommend.

(Also if you're spending little money on the turbo you will end up spending much bigger money on everything else around it. There's no cheap way out, really.)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...