Jump to content
SAU Community

Recommended Posts

  • 4 months later...
5 hours ago, R377 said:

 

not sure what you mean Johnny ?

 

Referring to the caliper adapter kits.  Alpha Omega?

Good to see steady progress and sensible upgrades with your car.

Hopefully there's a proper diff centre on the horizon?  1.5 way at the very least, but don't be afraid to go with a 2 way.  Massive improvement when incorporated with a HICAS lock bar.

22 hours ago, Dale FZ1 said:

Referring to the caliper adapter kits.  Alpha Omega?

Good to see steady progress and sensible upgrades with your car.

Hopefully there's a proper diff centre on the horizon?  1.5 way at the very least, but don't be afraid to go with a 2 way.  Massive improvement when incorporated with a HICAS lock bar.

 

 

Oh yes i forgot about that.  Johnny talked me into getting a proper lsd.  I went with a Nismo GT Pro 2-way.  Pricey but very good under load and under brakes

  • Like 1
  • 2 weeks later...
On 11/10/2017 at 11:52 AM, ActionDan said:

Check your:

Ride height at each corner - uneven heights = uneven corner weights and more likely to lock one side. 

Toe/Camber - Less tyre contact patch = more lock up. 

 

thanks for that, i didn't even think about that.  I think one side of the car is slightly higher with the coilovers

On 11/8/2017 at 8:18 AM, Dose Pipe Sutututu said:

Oooo I see Intima pads :)

How do you find the Type-D?

 

I can't really say as i went from stock brakes with qfm pads to evo's 350mm front and rear with intima d - type track pads. It would the equivalent of dicking Margaret Thatcher to dicking Jennifer Hawkins....

Evo brakes are just soo good i got travel sick with them !!!

  • Like 1
  • 4 weeks later...

 

Just did a compression test - all cylinders were 150-160 which i am well happy with...

 

reference service. 14mm sump plug.  16mm spark plug. plug 4 is a bit tricky to get to, have to remove a 10mm bolt to get the right angle on it

NGK 7121     BCPR6ES-11 plugs

  • 1 month later...

Looking around for new tyres - Nankang AR-1 looks to be popular.  They only do a 295 or a 265 tyre for the rear.  I pulled the hell out of my rear guard and tried on a 295 with my 10+38.  It just fit inside by about 7-8mm with about 2 degrees of rear camber and i had about 12-15mm on the outside :) I dumped my car, now on big bumps and driveway the inside of the back rim scrapes on the inside.

I was thinking of going a 10.5 wheel.  They make a +35 offset in a 10.5 wheel. It will sit 3mm inside and 9mm outside.  I am not too sure about this. Would need a 5mm spacer and that would take it to 14mm wider to not make it scrape.  Either that or pull the ride height up....hmm. Maybe ill have to play around with the tyre calculator

https://www.wheel-size.com/calc/?wheel1=295-30-18X10ET38&wheel2=295-30-18X10.5ET35&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm

going from 10+38 to a 10.5 +35 with the 295 tyre i tried on, the wheel is 3mm closer and will stick out 9mm further, the tyre. Tyre will stick out 3mm further which would be ok.

To run a 5mm spacer on that 10.5 wheel

https://www.wheel-size.com/calc/?wheel1=295-30-18X10ET38&wheel2=295-30-18X10.5ET30&fcl=50mm&wcl=30mm&scl=50mm&sr=0mm

wheel will sit out 14mm further and tyre would stick out 8mm further...That would be good, the wheel would sit more flush with the guard.

So i might need to look for a lightweight wheel that is 10.5 +30 to +35 offset ? any suggestions ? im looking at the new enkei rs05rr but i would need to run a 5mm spacer with that at a minimum

 

With the fronts they do a 245/40 which is a balloon but they do a 255/35 which sat nice and low profile.  I have a 9.5 +15 with 235 on the front with -3 camber and it does touch the guard but i haven't got stuck into pulling the guard out yet.

I was wondering if i could fit a +22 to +25 wheel with a 255 tyre on the front ? There is about 25mm on the inside but i haven't turned the wheel yet.  Wondering if i could fit a 255 and still be low ?

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...