Jump to content
SAU Community

Are Lowering Springs Really That Bad....?

polyarkos
 Share

Recommended Posts

polyarkos Explorer

polyarkos

Posted
Posted

So I priced up some BC Golds for $1495NZD, plus $500NZD for the certification to make them legal, when I found some Jamex springs for $299NZD delivered that will give me a 40mm drop.

The seller (Jamex NZ) says there are no problems with using these as they are legal (no cert needed, direct replacement etc) and are fine with standard shocks - even saying they have never had issues with any of their springs being used on standard height shocks.

I understand the attraction of coilvers, but I don't think I NEED that kind of adjustability. I just don't wanna wreck my ride or injure anyone by using lowering springs alone.

Are they really that bad?

P.S. At $400+ a corner to replace only the shocks(KYB) it is worth going to coilovers, but only if I need to replace them.

Daleo Grand Master

Daleo

Posted
Posted

OEM shocks can be had for significantly less than $400 per corner!

Think amayama.com or similar.
I can possibly get information for you as someone just purchased a swag of OEM suspension components (including all 4 shocks) and the total was just over $700 delivered.

What is involved in the Certification for Coilovers? Is this for some kind of external/independant testing?

I'm curious, as the main stumbling block to engineering BC coilovers in NSW (Australia) is the absence of material data & testing info from the parent manufacturer.
If I had this kind of information; I could provide it to an engineer, and he'd be happy to sign them off.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

OEM shocks can be had for significantly less than $400 per corner!

Think amayama.com or similar.

I can possibly get information for you as someone just purchased a swag of OEM suspension components (including all 4 shocks) and the total was just over $700 delivered.

What is involved in the Certification for Coilovers? Is this for some kind of external/independant testing?

I'm curious, as the main stumbling block to engineering BC coilovers in NSW (Australia) is the absence of material data & testing info from the parent manufacturer.

If I had this kind of information; I could provide it to an engineer, and he'd be happy to sign them off.

Getting a cert is easy (all my mods are certed/legal) but it costs around $550 so you tend to do it once for all the mods.

Over here the cert process is remarkably sensible.It is run by the Low Volume Vehicle Technical Association (not a government body) . Certifiers have a lot of discretion and although there is a guide manual which mandates some things much is left up to their experience and knowledge. For example they will pass Cusco camber arms but not some of the dodgy cheapo versions although there is not a list of approved arms as such.

polyarkos Explorer

polyarkos

Posted
  • Author
Posted

OEM shocks can be had for significantly less than $400 per corner!

Think amayama.com or similar.

I can possibly get information for you as someone just purchased a swag of OEM suspension components (including all 4 shocks) and the total was just over $700 delivered.

Checked out amayama.com, and at $196USD per corner I'm looking at $922NZD plus shipping and 15% GST - call it an even $1200 plus springs and coilovers become a real possibility :whistling:

Daleo Grand Master

Daleo

Posted
Posted

Checked out amayama.com, and at $196USD per corner I'm looking at $922NZD plus shipping and 15% GST - call it an even $1200 plus springs and coilovers become a real possibility :whistling:

Let me find out for you;there is a cheaper way.

polyarkos Explorer

polyarkos

Posted
  • Author
Posted

I got Jamex lowered springs for my ARX and no problem with it. I bought it from Auckland.

Did you get them from the listing on TradeMe?

Let me find out for you;there is a cheaper way.

Don't rush, I don't need shocks. I just wanna lower my car and will use lowering springs unless they ruin my shock, at which stage I'll either replace or go coilovers.

stock stagea Collaborator

stock stagea

Posted
Posted

The only way they will damage your shock is if you go too low, the actual shock will top out and crap around the top. I have seen this happen to an old set that I used 40mm lowered springs then cut 2 coils off, this was done for shits and giggles on an old cortina that we used as a paddock/dirt racer and we had it in that car for about a year and a half.

Captain Wow Enthusiast

Captain Wow

Posted
Posted

I lowered my 180 on Tein lowering springs and the shocks were fine for a couple of years. I finally replaced them with Bilstein coilovers for track work. I actually preferred the ride comfort on the road with just the lowering springs.

- Lance

V28VX37 Veteran

V28VX37

Posted
Posted

Different car but still relevant, I had lowered King Springs with standard shocks on my R34 GTT for about a year and the ride quality was ... shocking (pardon the pun). Very crashy. The shocks also started leaking before long as they operated outside the designated area with the lowered springs. So in short, if you're going lower springs, get shorter shocks to match, to maintain ride quality.

I ended up going BC BR's with custom (softer) spring rates and difference with night and day, so much better than the OEM+King combo. I priced up a set of aftermarket shocks only, to go with the Kings, and they weren't much cheaper than the BC's...

Just my $0.02

  • Like 1
Sinista32 Grand Master

Sinista32

Posted
Posted (edited)

Keep the OEM shocks and get Lucas springs and you will be fine.

Ask a professional steering and suspension shop the part number, buy & install them your self and then take it back and get it aligned properly.

About $550 all up. $210 F/R pairs each and $85 for an alignment.

Ride remains almost the same (slightly stiffer) ride height less. Win/Win

Edited by Sinista32
Trex Grand Master

Trex

Posted
Posted

No one has mentioned that if you're getting stiffer springs, the shocks aren't designed for them. You'll notice when going over a bump or a ditch it will be firmer on the compression but spring back quicker when the spring is released from its downward stroke. The standard shocks aren't designed to have that much force pushing on them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...