Jump to content
SAU Community

Recommended Posts

Hi guys i'm new here so i hope i'm doing this the rite way.

I contacted Gibson Motorsport a few month back about potentially reproducing their rb20 low mount manifold for mine and my brothers rb powered cars and got this response -

Thanks for your interest in the low mount manifold on the RB 20, we have not had any calling to reproduce this spec manifold recently, as you may know they were custom made for the race application back in the late 80’s and the talented guy who made these units was a specialist in manifold production and has been retired now for many years, having recently spoken to several people who could produce a similar manifold I would suggest that it could be done but may get quite expensive for a very low volume production run, would you be interested in just a single unit?

Before I send samples for some formal quotes can you also give me an indication of what you think “for the rite price” might be as there are many low quality items for that application on eBay that I will have trouble competing with and I need you to understand the price I quote would be for supplying a high quality custom made race spec unit.

I look forward to hearing from you.

So the question now is, who would be interested in potentially owning one of these pieces of motoring art??

And what would you guys consider a fair price??

I may be interested. Considering second hand GTS-R manifolds go for around the $1250-$1500 mark. I'd say 2k+ would be my guess.

Here's an older thread, with someone asking a similar question.

http://www.skylinesaustralia.com/forums/topic/433757-gibson-hr31/?hl=%2Bgtsr+%2Bmanifold#entry7074009

As much as I want one and it would be awesome, plus sound porn, 2k compared to a 6 Boost at 1300ish seems a little steep. Start low and see what reply you get. If they are thinking to make money at 1500 and you hit back with 2k seems fair then you, and others are 500 out of pocket. Ill see what the price is but god damn I want one. Are RB20 and 25 the same fitment wise? If not, will they make them for a 25 non neo S2?

Edited by FordyR31

Keep in mind they are constructed differently to 6 boost manifolds.

The Gibson manifolds use custom bent pipe, rather than off the shelf bends.

  • Like 2
  • 2 years later...

They showed some interest at first but It was too long between emails and they never replied after a while... I spoke to a guy two weeks ago who actually worked in the Gibson team on the cars and rb20 motors back then and he gave me some names to talk to if I was interested in the manifolds etc..

I don't see why we couldn't still get something happening if there was 10-20 people actually genuinely interested in this who have the money for it...

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...