Jump to content
SAU Community

Recommended Posts

Within a fully secure underground complex car park some prick has used what looks like a pick and hammer to try bust my lock out or a screwdriver. They never got into my car but the lock is completely totally destroyed.

I have an alarm, immobiliser and steering wheel lock that is always in a hard-lock position when parked.

Is there any way i can just replace the key hole with a metal plate or replace with a keyless entry door handle? This is the 3rd time - 1st in Newcastle, 2nd in Brisbane, 3rd now in Melbourne someone has tried to break the key/lock to get into my car..

Anyone got suggestions? Otherwise im over this car im selling it next week..

post-135908-0-34788700-1407559584_thumb.jpg

Unless it was your own personal lock up garage that only you have the remote/key for, I wouldn't assume it's "fully secure"... even if you had your own garage, nothing is ever secure. Anyone who can gain entry to the basement car park can physically get to your car.

R33 yeah.

Since i have alarm, immobiliser and steering lock fitted ive just removed the barrel key lock from the handle, covered it with a metal plate, painted it same colour as car. Only way they can get in now is smashing window or stealing my keys..

Hate these maggots.

Just FYI you don't need to smash the window to get into an R33. The windows have enough flex in them to pry away and get a coat hanger in there to flick the lock.
It's how my previous 33 was stolen, and also how RACV get in when keys are locked inside.

Passenger door?

disconnceted the locks on passenger door now too - its fully keyless entry.

f**ked if my battery goes flat, but at least less a chance of these maggots stealing my car.. i hope.

  • Like 1

haha fyi the r33 door unlock trick was covered about 9 yeas ago from memory

there was a how-to thread on how to disable it as well in the tutorial section, very old news

  • Like 2

haha fyi the r33 door unlock trick was covered about 9 yeas ago from memory

there was a how-to thread on how to disable it as well in the tutorial section, very old news

What is the trick? just jam a screwdriver in and turn it?

So they had another go last night, now passenger door lock is ruined, drivers side door lock even more so than last week and now they jimmied the window scratching the f**k outta my window and ripping the rubber seals to pieces...

AGAIN didnt get in.. There goes about $500 replacing the seals and locks. :(

Getting really tired if your shit junky thieves.

wow.... that's no longer opportunistic dude, that's targeted at your car... I would either sell it or move it to a new location. Does your 'secure' carpark have CCTV? Have they audited the swipe access at all entry and egress points?

^^^ Good one mate now it's everyone's information. Hell of a lot of captains about to set sail!!

Old news. You can sometimes tell if an R33 has been broken into because the metal/trim above the window is creased from being pried open.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Prime parking, she is a little girl...LOL
    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
×
×
  • Create New...