Jump to content
SAU Community

Recommended Posts

Hey all,

Gotta a question, my R33 has had brand new genuine nissan coil packs in it. The other day it developed a miss on boost so I thought it was the plugs since they were nearing the second oil chance/10000km. I changed the spark plugs to a fresh new set, gapped to .833 and took it for a drive only to find the miss is still there. It takes effect at about 4000rpm as soon as boost is ramped up. I run an SS2 on 15psi. Low down and cruising the car is fine, just getting weak spark. It will free rev to 7000rpm without an issue. I can close the gap a little tighter but really want to avoid this.

The coil packs were brand new and about 3 years old. The car is always run with the coil pack cover removed. Would my better option be a set of spitfires or have OEM's become more affordable? Are the Spitfires improved over the standard coils? Will they last longer and eliminate the need to gap the plugs?

Link to comment
https://www.sau.com.au/forums/topic/446696-how-long-should-coil-packs-last/
Share on other sites

Why are you sure is due to weak spark and not a boost leak?

I'm not, really. I assume its spark related since the symptoms are exactly the same as when one of my yellow jackets was on its way out. I have no issues building boost, its just the 4krpm barrier, it farts and carries on. I will take the whole thing apart this weekend and see if I can see any issues with the coils, I'll regap the plugs, I'll extend the spring in the coils a little more and I'll go over for boost leaks.

Can I just test from the turbo inlet all the way back or should I disconnect from the TB, block it off then test from the turbo? It was a kick in the balls to hear it miss when I took it out last week, I was really hoping it was just the plugs. I think I should isolate the intake from the engine otherwise the air will just piss out the engine.

Edited by SargeRX8

Just did a intake pressure test. Only place which started squeezing air out was the oil filler hole in the top of the engine. I could not hear any hissing anywhere else around the engine bay. I took all the plugs out, checked the gaps and put it all back together. The miss is still there on boost. Looks like I might have a dud coil. I'll be ordering another set of OEM's. Ah well.

unfortunately I don't think there's any way to tell. Bought mine on ebay for $330 and assumed fakes at that price. Compared them to my original ones and they were physically identical in every way, and arrived in nissan boxes. Mine are still working fine but who knows

Yeah my second set I just bought off eBay for the exact same price from a seller in Melbourne with relatively good reputation. He also sells Z32, not genuine, listed as aftermarket parts. The coil packs are listed as Genuine Nissan made in Japan components.

When they arrive, I'll be trying to pinpoint the faulty coil using the new ones, one by one. When I find the one causing the fault, I will dissect it and also dissect one of my original nissans which is no good and comparing the internals. Even genuine components could be prone to failure.

The only thing which would make me iffy is when sellers sell oem components, not listed as genuine and come on oem packaging.

I'm not dissatisfied with the performance of my current coils. I got a good 3 years about of them, about 45000km. The previous yellow jackets I had lasted about half a year.

Edited by SargeRX8

New plugs new coils and still cant get past 4000rpm. Ive checked for boost leaks and found nothing. Ill try again on saturday for leaks.

What else can cause this? My coil loom looks like shit. Broken clips and what not. Nothing in my car has changed. This came about all of sudden about 3 weeks ago. I dont think my coils had anything to do with it. Unless my testing has fouled my plugs which isn't likely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...