Jump to content
SAU Community

Recommended Posts

Hey all,

Gotta a question, my R33 has had brand new genuine nissan coil packs in it. The other day it developed a miss on boost so I thought it was the plugs since they were nearing the second oil chance/10000km. I changed the spark plugs to a fresh new set, gapped to .833 and took it for a drive only to find the miss is still there. It takes effect at about 4000rpm as soon as boost is ramped up. I run an SS2 on 15psi. Low down and cruising the car is fine, just getting weak spark. It will free rev to 7000rpm without an issue. I can close the gap a little tighter but really want to avoid this.

The coil packs were brand new and about 3 years old. The car is always run with the coil pack cover removed. Would my better option be a set of spitfires or have OEM's become more affordable? Are the Spitfires improved over the standard coils? Will they last longer and eliminate the need to gap the plugs?

Link to comment
https://www.sau.com.au/forums/topic/446696-how-long-should-coil-packs-last/
Share on other sites

Why are you sure is due to weak spark and not a boost leak?

I'm not, really. I assume its spark related since the symptoms are exactly the same as when one of my yellow jackets was on its way out. I have no issues building boost, its just the 4krpm barrier, it farts and carries on. I will take the whole thing apart this weekend and see if I can see any issues with the coils, I'll regap the plugs, I'll extend the spring in the coils a little more and I'll go over for boost leaks.

Can I just test from the turbo inlet all the way back or should I disconnect from the TB, block it off then test from the turbo? It was a kick in the balls to hear it miss when I took it out last week, I was really hoping it was just the plugs. I think I should isolate the intake from the engine otherwise the air will just piss out the engine.

Edited by SargeRX8

Just did a intake pressure test. Only place which started squeezing air out was the oil filler hole in the top of the engine. I could not hear any hissing anywhere else around the engine bay. I took all the plugs out, checked the gaps and put it all back together. The miss is still there on boost. Looks like I might have a dud coil. I'll be ordering another set of OEM's. Ah well.

unfortunately I don't think there's any way to tell. Bought mine on ebay for $330 and assumed fakes at that price. Compared them to my original ones and they were physically identical in every way, and arrived in nissan boxes. Mine are still working fine but who knows

Yeah my second set I just bought off eBay for the exact same price from a seller in Melbourne with relatively good reputation. He also sells Z32, not genuine, listed as aftermarket parts. The coil packs are listed as Genuine Nissan made in Japan components.

When they arrive, I'll be trying to pinpoint the faulty coil using the new ones, one by one. When I find the one causing the fault, I will dissect it and also dissect one of my original nissans which is no good and comparing the internals. Even genuine components could be prone to failure.

The only thing which would make me iffy is when sellers sell oem components, not listed as genuine and come on oem packaging.

I'm not dissatisfied with the performance of my current coils. I got a good 3 years about of them, about 45000km. The previous yellow jackets I had lasted about half a year.

Edited by SargeRX8

New plugs new coils and still cant get past 4000rpm. Ive checked for boost leaks and found nothing. Ill try again on saturday for leaks.

What else can cause this? My coil loom looks like shit. Broken clips and what not. Nothing in my car has changed. This came about all of sudden about 3 weeks ago. I dont think my coils had anything to do with it. Unless my testing has fouled my plugs which isn't likely.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...