Jump to content
SAU Community

Recommended Posts

I'm after some infomation, my car was tuned on caltex eflex, will I be able to use united e85 in my car if I ever wanted to, if I was around no eflex, and would it drive and perform as normal? I know caltex say the E% varies from 70-85 and they change it to suit the Seasons of the year, and united % is gaurnteed more, would the difference in e% change the way it performes?

Link to comment
https://www.sau.com.au/forums/topic/447351-running-on-e85-if-tuned-on-flex/
Share on other sites

There is no e85 close by, probaly about 30-40 minutes away, but there is eflex one 10 minutes from my house, thats more the reason behind it. Only asking coz there seems to be more and united coming up around the place

I do have flex fuel sensor sniffer what ever you want to call it, the ecu has dual maps from 98 and eflex, so can't use either of them with what ever in the tank, just wasn't sure about e85 because it wasn't tuned on that

What do you mean on how it was tuned? With the fuel maps etc?

Whether the tuner has left left some leeway so that if you do put e85 from e70 and you run half a point leaner it doesnt matter but if it was tuned to its max and now you suddenly run it a point leaner it will affect you. Do you know what your A/F ratio was on the e70 tune?

Whether the tuner has left left some leeway so that if you do put e85 from e70 and you run half a point leaner it doesnt matter but if it was tuned to its max and now you suddenly run it a point leaner it will affect you. Do you know what your A/F ratio was on the e70 tune?

Oh yer true, umm don't know of the top of my head but I'm thinking that there is leeway there.

It also depends on how Eflex is in the tank and how much E85 you put in, empty tank then fill to top will change the E% more then half tank adding 20l

I do have flex fuel sensor sniffer what ever you want to call it, the ecu has dual maps from 98 and eflex, so can't use either of them with what ever in the tank, just wasn't sure about e85 because it wasn't tuned on that

I don't get this, cause the only way this would be plausible is if you emptied the tank to change from one to the other, contact your tuner and ask if he has setup a flex tune

If tuned for E70 and had to use E85 it's simple to toss ULP in to make it E70 . Its a 15% difference you can work out based on an almost 60L tank . Works out to 2.25L of petrol to every 1/4 tank so 2.25 / 4.5 / 6.75 and 9 litres . I'm sure 3 5 7 and 9 would work fine and if you have a wideband wired it would compensate enough for normal road use .

Just don't bugger it up watching the dollars instead of the litres or carry a clean dry 10L container in the boot .

A .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
×
×
  • Create New...