Jump to content
SAU Community

Recommended Posts

Your propaganda and JEDI-77's Z32 have swayed me to appreciate and even consider these cars to be cool.

Maybe I need to have a ride in one

:D Mark's car is nice, there are plenty worse ones you could have a ride in!

They are no more troublesome than any other 25ish year old import, owned by people who can't afford the basic maintenance.

There are many, many shitboxes not worth saving (soon to be parts cars), and a few very well cared for/maintained/modded examples. There are still enough average/above average ones floating around that could be nice with a bit of time and effort (and money).

  • 2 weeks later...

Final fuel line re-routing has begun. Came to a stop when I realised I needed to connect 2 lots of 2 female hose ends. Always forget the males.

So took the time to install the Twinz chin spoiler, looks good, fits well, but now I have to redo my undertray as access to mounting holes are reduced.

20160425_172210_zpsvklqeyxd.jpg

20160425_172233_zpssbfet6kl.jpg

  • 2 months later...

Fuel system is complete again now. 1650s are in etc

Just finishing up install of in cabin fuel pressure gauge, have a grommet or 2 to replace, and footwell to put back together.

Then just need to find the laptop charger and I can hopefully fire it up again.

  • 4 months later...

Not long after my last post, I did find the laptop charger. Also discovered that the laptop battery was proper stuffed and would not power on. So I had to buy a new laptop, and all my tunes are stuck in the old laptop. Anyway...

I did get the zed fired up again and it idled perfectly.

Not long after that, I happened upon an Adaptronic select on the forum here (thanks Count Grantleyish, top seller!), and since I am obvioulsy not in any great hurry to get this bloody car working again, I decided to bite the bullet and replace Nistune with Adaptronic. Nearly got it ready to start too, when those bastards at Link ECU had a special this month on their Z32 plug in G4+.

So the Adaptronic was gone before it began, and I am currently waiting for the Link. At least alot of the wiring I did for the adaptronic isn't wasted, just needs to be re-terminated at the ECU (widebands and all the other external sensors).

In the meantime, I have also sold off my original Ross Metaljacket balancer, with a view to get one of the new ones with the trigger wheel already attached. Obviously all the bracketry and sensors that go with this will need to be sorted at some stage. Like everything, it all takes time and/or money, which I don't have much of either with now 2 kids under 1.5.

Also forgot the fancy sump i picked up. It is from Specialty Z in the states, was used on a local race car that met an untimely end at lakeside. It is a factory sump, modified to suit.

Big capacity, fancy trapdoors and baffles and scrapers and stuff20161015_180024.jpg

20161015_180031.jpg

20161015_195449.jpg

20161015_180043.jpg

  • 2 months later...
  • 10 months later...

Bit of an update.

Car is now running on the link G4+, with crank trigger and modified CAS. Have a new sync trigger to install that replaces the CAS altogether, but haven't got there yet.

Going to be removing the AEM widebands and replace them with Ecotrons ALM CAN II. Received them yesterday so no more excuses.

Also been working on an in car pc/dash setup which is basically complete. It is a little bit rougher than I'd like but still pretty happy with how it turned out. Will fine tune the display as I go, was just a quick layout to define the size. The blue LED for highbeam is way too bright (even with twice the resistance of the green indicators) so I will have to do something there. Have some different LED's with a diffused face in transit, so they might work better, even tho I do like the chrome bezel on these.

Basic setup is as follows. 7in Win 10 touchscreen mini pc in centre console (armrest), dash screen is the 2nd display and is a usb powered raspberry pi hdmi 7in. Software is the regular PClink.

20171021_232121.thumb.jpg.2bad97d4a834a31f8392440e8a3e6b92.jpg20171024_132326.thumb.jpg.a210506ea99dd3723c8f965e5d3d084b.jpg20171024_155150.thumb.jpg.817d9f3d6b48a0582f013dce9ea040ef.jpg20171026_225304.thumb.jpg.2b9c94746b9de2a2a0eec885b03bb484.jpg20171029_140355.thumb.jpg.e18c4dd85dae63b0504d5afb628c852e.jpg20171028_224427.thumb.jpg.ab6235d2aabb17f2d28fe6a9c39f0e92.jpg

car pc dash small day.mp4

Fuel setup has also been changed. All fuelab products removed. They were the source of some intermittent delivery issues I was having. Working just enough to send me on a massive wild goose chase changing everything else.

Anyway, settled for now on twin 460's in tank, no surge tank anymore, turbosmart FPR2000 and a Radium damper.

  • Like 5
3 minutes ago, GTofuS-T said:

That's awesome! Love the dash!! would be keen to see a bit more detail on the development of it one day. 

Thankyou! Once I have settled on the setup and finished it all up I will add some more details and pics of the whole thing.

  • Like 1
2 minutes ago, PranK said:

I like the concept of a high beam dashboard LED burning the retinas of the driver. People will use high beams sparingly then. :)

 

haha I agree 100%, just not in my car :D and I would like to be able to see again shortly after I turn them off, which as it stands, I can't. It is that bright. I was quite surprised as they are the same series as the green ones, and they are pleasant.

  • Like 1
4 minutes ago, MagicMikeZ32 said:

haha I agree 100%, just not in my car :D and I would like to be able to see again shortly after I turn them off, which as it stands, I can't. It is that bright. I was quite surprised as they are the same series as the green ones, and they are pleasant.

Perhaps you can direct the light from the LED out the front to supplement the high beams ? :)

8 minutes ago, PranK said:

Perhaps you can direct the light from the LED out the front to supplement the high beams ? :)

Funny you should mention that... Since I have replaced the foglights with the carbon ducts, night viability is terrible without high beams, so I have plans to do something to supplement the low beams (and also the parkers that are supposed to live in the foglights).

But I am a while off a mountain run so no great rush to start on that.

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...