Jump to content
SAU Community

Recommended Posts

1937498_10153647655264386_20183467136085

Welcome to the second running of the SViRC. The 2015 season will see a few changes while still focusing on safe and fun racing for all.

This year will have much the same format as last years running the included cars and road tracks that come standard with an iRacing membership but with 3 added rounds using Aussie cars and circuits.

The Aussie rounds will consist of the Ford and Holden racing cars along with the Phillip Island and Mount Panorama and Oran Park race tracks. While these rounds will not count towards overall series points they should be a welcome high paced change throughout the season.

The rest of the races in the series will use a point system like that of F1.

Positions 1 through 10 awarded 25, 18, 15, 12, 10, 8, 6, 4, 2, and 1 points. Remaining positions awarded 0 points.

Race format is same as last year with -

Practice (50mins) – Qualifying (10mins) – Race 20 laps (approx. 30-35mins)

Cars -

Mazda MX5 Cup, Mazda MX5 Roadster, Pontiac Solstice and the Ford spec Racer.

(Aussie Rounds) - Ford Falcon FG V8, Holden Commodore VF V8

Tracks -

Lime Rock Park (USA), Okayama (JAP), Laguna Seca (USA) and Summit Point (USA), Charlotte (USA)

(Aussie Rounds) - Phillip Island, Mount Panorama, Oran Park

To join the ‘SAU Vic iRacing Championship’ head over to www.iRacing.com then search the league directory for the ‘SAU Vic iRacing Championship’ and click on the ‘join’ button. Membership to the site is very affordable and much cheaper than panel beating or a new gearbox! There will also be trophies for the top drivers 3 at series end.

So get ready for an action packed year in the SViRC!

See you on the track! :)

Driver List -

  • Tony.O
  • Gary.F
  • Lee.P
  • Chris.C
  • Sam.L
  • Liam.C
  • Jian Cai Pook
Link to comment
https://www.sau.com.au/forums/topic/452253-2015-sau-vic-iracing-championship/
Share on other sites

2015 SViRC Race Dates

7th January – Test Round – Charlotte Motor Speedway (USA)

4th February – Round #1 – Mazda Raceway Laguna Seca (USA)

4th March – Round #2 – Lime Rock Park (USA)

1st April – Round #3 –Phillip Island Circuit (AUS)

6th May – Round #4 – Okayama International Circuit (JPN)

3rd June – Round #5 – Summit Point Motorsport Park (USA)

1st July – Round #6 – Charlotte Motor Speedway (USA)

5th August – Round #7 – Mount Panorama (AUS)

2nd September – Round #8 – Lime Rock Park (Chicane) (USA)

7th October – Round #9 – Mazda Raceway Laguna Seca (USA)

4th November – Round #10 –Included Tracks (Vote)

2nd December – Round #11 – Oran Park (AUS)

How is iRacing to play with a keyboard? Will I get brained by peeps with steering wheels?

Can only play iRacing with steering wheel or at the least a gamepad, and even then a gamepad is very hard to use against people with a steering wheel. Best bet would be to grab a wheel from a pawn shop for like $20 or so and see if its your thing and you have a bit of fun. I started with one from Cashies years ago and some of the best iRacing drivers still use older wheels, Either way well worth it and hope to see you on track :)

Will we be running fixed setups? To make the field even so that the people that have not got a

lot of experience more of a chance.

it will be fixed setups like last year yes :)

Unfortunately I don't think I'll be able to commit as much as I'd like to, like the latter half of last championship. But put me down and I'll come race when I'm around. Thanks Tony!

  • Like 1

7th January – Test Round – Charlotte Motor Speedway (USA)

Tonight is the first time on track for the 2015 SViRC, practice is from 8pm from 50mins followed by a 10min qualifying session then onto a 20lap race. This round is primarily about having fun, getting back into the swing of online racing and to allow others time to join before the first round with points next month. If you took part last year you will still be on the list of drivers. If you are a new comer to the series head over to http://members.iracing.com/membersite/member/LeagueView.do?league=1089 and join the league. See you on track tonight :)




  • Similar Content

  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...