Jump to content
SAU Community

Recommended Posts

Car was dropped off yesterday to get the guards done should be finished by mid next week. Then car will be sent off for some more work at havoc fab and then off to racepace for some cusco suspension work.

Took a photo of it before I put it on the trailer. Still undecided if I should keep the wheels white or spray them black

post-84279-14374609586873_thumb.jpg

I'm going for pretty much exactly like this guard work front and back.

post-84279-14374610100597_thumb.jpg

If the flare job ends up as good as that blue thing you would have to be happy with that.

Stick with the white centre wheels. More work to keep clean but it will stand out more on the track and in your pics.

If the flare job ends up as good as that blue thing you would have to be happy with that.

Stick with the white centre wheels. More work to keep clean but it will stand out more on the track and in your pics.

Yeh those guards look awesome. I've shown the bloke doing the work this pic and said make it look exactly like this. Gunna cost me a bit but it will be worth it.

I'm with you on that I reckon the white stands out more to. It's defiantly gunna stand out on the track.

The rear end will be a comparatively easy.

Front end suggestion - get the ride height down near where you want it, crank on the camber and caster you will need, and with the springs removed from shocks get an idea of what rubs as you move the wheels through their suspension and steering range. Anything looking like rubbing needs some loving with a hammer to give clearance.

Yeah the car will be getting lowered as low as it can go once other side is done then they will be going through with all the clearances problems. I've told them I don't want any rubbing/fouling throughout the steering arch. They've taken a lot out of the guards because they haven't adjusted the height yet and those guards were sitting on the tyres.

Plenty of camber, none of this half-done 2.5 or 3 degrees stuff. Make sure your hardware allows for a good 5 degrees, then with clearance for that amount you'll never have troubles.

The forward tub sections will be the area needing some love, particularly with a bit of caster pulling the wheels forward.

I'm really looking forward to the end result.

Yeh as soon as this work is done I'm gunna send it in to racepace to get there modified cusco arms.

You and me both!! Car should be fully finished in the next 6 weeks.

What do racepace modify on their cusco arms?

Every arm in my 33 is cusco and Ive never run out of any adjustment, running modded knuckles and relatively extreme alignments.

Wondering if Ive missed something?

  • 4 weeks later...
  • 3 weeks later...

Cars in at racepace atm getting the work done. Slowly running out of time to get it ready for wtac [emoji45]

Keep at it dude. We just put the gearbox back in mine on the weekend.

Use the SAU Nats on the 3rd of Oct as the shakedown.

  • 4 weeks later...

Cars slowly coming along at the panel beaters should be finished by next week from getting the custom guards done. Fronts are done minus paint. Look awesome!!

post-84279-14435868508894_thumb.jpg

post-84279-14435868681896_thumb.jpg

post-84279-14435868805992_thumb.jpg

post-84279-14435868903861_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...