Jump to content
SAU Community

Recommended Posts

Hey guys, I have a 1996 R33 skyline GTS-T, recently bought it and thinking of adding some more power, current mods to my knowledge are ;

- splitfire coil packs

- kls power spirit turbo

-fmic and intake (Z32 afm and all the rest)

-high flow cat and full exhaust system

-walbro 500hp fuel pump

-current spark plugs are platinum PFR7B (problem possibly)

-dump pipe

Etc etc etc, basically all the basics

Last tune was in 2013 and was 220kW, I've misplaced the paper though.

So here's my question, what could I do to possibly get it to 250kW, I was thinking cams or ?

Also, at high revs, around 5500-7000 the car starts to spit and misfire, but the plugs were changed in 2013 so I don't know what it could be. I'm aware there's topics on these but I couldn't really gather much from them.

Thanks for your help guys.

Link to comment
https://www.sau.com.au/forums/topic/454621-rb25det-upgrade-and-problem/
Share on other sites

Yeah i vote for checking your sparkplugs/coilpacks and getting a better turbo.. or take it to a well known tuner in your state/location and they will be able to see what your car is doing and most likely be able to help diagnose any/all problems

And you suggested cams, they cost more than a turbo installed ...... Or did you plan on putting them in yourself? You don't seemed clued up enough to do that.......

Edited by Ben C34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...