Jump to content
SAU Community

Recommended Posts

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502459
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

I've had one of these in my GT St for 11 years,no complaints from me. :-)
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502491
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

its only going to be stock for another month or there about, so i wanted something that can handle a bit of a power upgrade and still last a while.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502524
Share on other sites

Nismo copper mix Twin plate, standard or competition spec. Buy one and you won't regret it. NPC clutches are also good.

An Exedy Sports Tuff Clutch sounds shit and would get destroyed as soon as you start adding some power to your car.

Pay the money now for the right clutch as suggested or you'll be doing it more than once and that can be a costly procedure if you can't do them yourself.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502662
Share on other sites

I disagree,what mods are you going to do,exhaust and maybe a couple of others the sports tuff will work well.

Can handle 300 kw at the rears and still be a comfy daily drive,butt if you want say 500 at the rears go for one of the

hyper clutches. :-)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502806
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

If you're staying with stock power, and driving it normally, that clutch is fine. If you're going for more power or will be launching/clutch dumping it, it will be inadequate.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502879
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503296
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Thanks ill have a look :cheers:

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503307
Share on other sites

I use the NPC 250mm organic single with 300kws and track days. But you don't launch at track days, so they're gentle on clutches. Its as easy to drive as the stock clutch. AFAIK the next step up from NPC is the carbotic, which will take more power and more punishment, but be a bit more difficult to drive. Since my GTR is no longer a daily, I would go for that now.

I think the Nismo coppermix twin recommendation is over the top for your use case, unless of course you have nothing better to do with the money.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503476
Share on other sites

NPC have good customer service so if you call them up they can help you out if you explain what you want exactly.

I agree the Nismo would probably be over the top but depends how deep your pockets are

unfortunately my pockets aren't that deep atm.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...