Jump to content
SAU Community

Recommended Posts

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502459
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

I've had one of these in my GT St for 11 years,no complaints from me. :-)
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502491
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

its only going to be stock for another month or there about, so i wanted something that can handle a bit of a power upgrade and still last a while.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502524
Share on other sites

Nismo copper mix Twin plate, standard or competition spec. Buy one and you won't regret it. NPC clutches are also good.

An Exedy Sports Tuff Clutch sounds shit and would get destroyed as soon as you start adding some power to your car.

Pay the money now for the right clutch as suggested or you'll be doing it more than once and that can be a costly procedure if you can't do them yourself.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502662
Share on other sites

I disagree,what mods are you going to do,exhaust and maybe a couple of others the sports tuff will work well.

Can handle 300 kw at the rears and still be a comfy daily drive,butt if you want say 500 at the rears go for one of the

hyper clutches. :-)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502806
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

If you're staying with stock power, and driving it normally, that clutch is fine. If you're going for more power or will be launching/clutch dumping it, it will be inadequate.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502879
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503296
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Thanks ill have a look :cheers:

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503307
Share on other sites

I use the NPC 250mm organic single with 300kws and track days. But you don't launch at track days, so they're gentle on clutches. Its as easy to drive as the stock clutch. AFAIK the next step up from NPC is the carbotic, which will take more power and more punishment, but be a bit more difficult to drive. Since my GTR is no longer a daily, I would go for that now.

I think the Nismo coppermix twin recommendation is over the top for your use case, unless of course you have nothing better to do with the money.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503476
Share on other sites

NPC have good customer service so if you call them up they can help you out if you explain what you want exactly.

I agree the Nismo would probably be over the top but depends how deep your pockets are

unfortunately my pockets aren't that deep atm.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...