Jump to content
SAU Community

Recommended Posts

Hey Guys, Always hated the big Hamburger on the front of my 370GT.

Swapping to Infiniti badging doesn't appeal to me either.

So, I did this.

Basically I modified the Nissan Hamburger.

20150418_172750_zpsykuf6n3j.jpg

20150418_172710_zpsgb3urvgy.jpg

20150418_172834_zpsjc56ffel.jpg

I used a boot emblem & stacked it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/455833-v36-custom-grille-emblem/
Share on other sites

Yes, I do to,

was actually tossing up between emblem less & modding the Emblem..

Great work modding the emblem. In my opinion I would stick with the Nissan / Infiti logo or have no emblem at all... Your car is stunning and I feel this custom emblem devalues it by "tarting it up" unnecessarily...

Edited by Sikahalv

Part of the reason for modding just the emblem was its 100% reversible.

As it stands, the grille is coated in Plastidip, easy peel off & back to chrome.

Emblem is in Epoxy, but is a simple replace with a new Nissan item.

You'd be surprised how good it looks in the flesh btw.

The alternative of going emblem less (which I was also tossing up between) is not reversible however, as it involves fiberglassing in the missing sections of grille from behind the badge.

Just something different, might keep it like this for a while, or maybe not, we'll see.

Unfortunately I'm cursed with a big dislike of the original grille emblem & dont particularly care for the toffy nosed infiniti badging.

Imo even a grille with a hole in it would be preferable.

Cheers.

There is a US website that made customer grilles, lips, spoilers, etc for G35/G37's.. I can't remember for the life of me what it was right now.. but if I come across it again I'll post it up in here..

Perhaps someone else may know the site I'm talking about (not outcast btw), they do a lot of carbon stuff as well (pricey, but look to be good quality).

Anyway I'll get back to you if I find it again :)

  • 2 weeks later...

A grille with the skyline "S" logo like the older models wouldnt look bad in my opinion. Provided it wasn't overly large and gaudy looking...

bonnet_emblem.jpg

Either that or perhaps "Skyline" or 370GT located on the lower right hand side of the grille Hakosuka style

Tokyo-Nostalgic-Car-Show-2010-47-Skyline

After 3 weeks my modded emblem sh1ts me now.

Its just to friggin big.

Part of the problem with the hamburger originally was its obese size.

I like the idea of the 370gt on the side Bliksem.

When I get a chance I'll re-do it as emblem-less & maybe try a side emblem.

All good fun.

Cheers.

yeah if you could do an embless-less grille, i'll debadge my whole car and not worry about this half half infiniti nissan badging i got going on lol

After 3 weeks my modded emblem sh1ts me now.

Its just to friggin big.

Part of the problem with the hamburger originally was its obese size.

I like the idea of the 370gt on the side Bliksem.

When I get a chance I'll re-do it as emblem-less & maybe try a side emblem.

All good fun.

Cheers.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...