Jump to content
SAU Community

Recommended Posts

  • 1 year later...
On 4/20/2015 at 10:40 AM, scotty nm35 said:

I thought the existing child restraints were ok these days as they realised the Aus standard ones were inferior? Perhaps I am wrong though.

I'm starting to look into this, will probably have make 100 calls to get to the right Government departments but i will update you guys.

Ps. Rang Northshore Prestige but they have no idea as they said they're only providing the Compliance Plate and that's about it.

Would be very interested where you get with this as I would like nothing more than to do away with the terrible anchor point install that was done on my car.

As an aside, anyone know how the Japanese child seats are installed? Do they use the "luggage" tiedown points or something else?

Would be very interested where you get with this as I would like nothing more than to do away with the terrible anchor point install that was done on my car.

As an aside, anyone know how the Japanese child seats are installed? Do they use the "luggage" tiedown points or something else?


I would say that they use the tie down points. If not there may be a thread point you can use and drill a small hole in the floor panel and use a floor type harness point.
3 hours ago, iamhe77 said:

Would be very interested where you get with this as I would like nothing more than to do away with the terrible anchor point install that was done on my car.

As an aside, anyone know how the Japanese child seats are installed? Do they use the "luggage" tiedown points or something else?

Got no where yet ........ rang around 10 time to difference Agencies

...but here is an interesting article from Japan Times back in 1999

http://www.japantimes.co.jp/news/1999/07/05/national/parents-unprepared-for-child-seat-law/

 

Quote

 

To avoid misuse and mismatching, Toyota Motor Corp. and Takata Corp., a major seat-belt maker, have jointly developed a new child seat based on a standard called ISOFIX that was drawn up by the International Standardization Organization.

The new seat, to be introduced in August, has a base that locks easily with hooks set in the rear seat of the car. Connectors attach the seat to the top of the base.

Toyota spokeswoman Hitomi Hayakawa said the new seat is easy to install and can be fixed firmly to the interior of the car without a seat belt.

 

 

 

  • Like 1

Ok 

I got a reply from the department of infrastructure ......sorry i had to remove his/her name as a part of the email disclaimer.

 
Quote

 

****** Ge***** <Ge*****.******@infrastructure>

12:21 PM (5 minutes ago)
cleardot.gif
 
cleardot.gif
cleardot.gif
to me
cleardot.gif
 
 
 
 
 

Dear Mr Kingdick,

 

Nothing is confirmed at the moment. I can’t give you any confirmation as to how the new system will look, operate nor what will be deleted, added or modified.

The system is still being developed at this stage with nothing set in concrete.

Anything you hear as being added, deleted or modified in the new system is guess work and should not be interpreted as fact.

 

Kind regards

 

cid:image001.png@01CEB48B.B2C9B360

 

Vehicle Safety Standards

RAWS

02 62746549

 

 

Isofix is the standard everyone manufactures seats to except stupid Australia.
They have done for many years now; but ADR refused to validate the safety of the seats or the fixture points.
All European cars sold in Australia have been fitted with ISOFIX mounts for years now

ADR have been protecting our lazy, stupid, backward child restraint manufacturing industry because they refused to adopt the global standard, as it would open them up to competition from far better quality equipment.

Due to the death of our Motor industry; ADR was forced to accept international standards which far outstrip any local testing, as legal, and this has opened the way for ISOFIX seats.

 

  • Like 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...