Jump to content
SAU Community

Is My Nistune Maxed Out At 310rwkw And Stock Afm Maxed Also?

boobeedoobee
 Share

Recommended Posts

boobeedoobee Community Regular

boobeedoobee

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Tuner can tell you.

Once you know, get rid of AFM and go MAP.( adaptronic or haltech plug in )

That said, you can still go beyond the limits of AFM's

EDIT

I remember Matt saying from there testing the limit is around 370kw for a single z32
Could try a HPX maf, but i would just replace the ecu if you are looking for over 400kw

Edited by jay-rod
breaker1845 Community Regular

breaker1845

Posted
Posted

Either you upgrade the AFMs to Nismo and you retune and get a better result, probably to the point where you max out the injectors/turbos and other components become limited.

Or you get rid of the Nistune ECU and buy another ECU and go with a MAP based sensor and forget about AFMs all together and tune the new ECU to the point where injectors/turbos and what not will be limited.

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine
Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.
Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Edited by jay-rod
  • Like 1
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine

Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.

Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Thanks it seems like this is a common question as to which is better? Afm or a plug in ecu which eliminates the afm? The general consensus leads to deleting the afm and spending the money on an ecu? A pair of nismo afm is going to cost 800ish I'm thinking this could be money better spent on an aftermarket ecu
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

won't a haltech platinum pro plug and play eliminate the need for any of those?
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Just bought a hpx airflow meter from Nistune. All going well it will be getting tuned on Friday. Nistune say its goo upto 800hp.

What did they cost for the pair if you don't mind me asking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...