Jump to content
SAU Community

Is My Nistune Maxed Out At 310rwkw And Stock Afm Maxed Also?

boobeedoobee
 Share

Recommended Posts

boobeedoobee Community Regular

boobeedoobee

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Tuner can tell you.

Once you know, get rid of AFM and go MAP.( adaptronic or haltech plug in )

That said, you can still go beyond the limits of AFM's

EDIT

I remember Matt saying from there testing the limit is around 370kw for a single z32
Could try a HPX maf, but i would just replace the ecu if you are looking for over 400kw

Edited by jay-rod
breaker1845 Community Regular

breaker1845

Posted
Posted

Either you upgrade the AFMs to Nismo and you retune and get a better result, probably to the point where you max out the injectors/turbos and other components become limited.

Or you get rid of the Nistune ECU and buy another ECU and go with a MAP based sensor and forget about AFMs all together and tune the new ECU to the point where injectors/turbos and what not will be limited.

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine
Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.
Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Edited by jay-rod
  • Like 1
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine

Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.

Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Thanks it seems like this is a common question as to which is better? Afm or a plug in ecu which eliminates the afm? The general consensus leads to deleting the afm and spending the money on an ecu? A pair of nismo afm is going to cost 800ish I'm thinking this could be money better spent on an aftermarket ecu
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

won't a haltech platinum pro plug and play eliminate the need for any of those?
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Just bought a hpx airflow meter from Nistune. All going well it will be getting tuned on Friday. Nistune say its goo upto 800hp.

What did they cost for the pair if you don't mind me asking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AdiR34
      Did tie rods. Steering now not "springing" back.

      By AdiR34 · Posted

      Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Keeper
      S A U N S W Club Membership

      By Keeper · Posted

      Got you mate. Check your email!
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I see you've never had to push start your own car... You could save some weight right now...
    • niZmO_Man
      For Sale 2003 Nissan Skyline V35 GT350 Premium

      By niZmO_Man · Posted

      You need to put location and price
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Sounds good.  I don't 100% understand what your getting at here. When you say, "I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down" do you mean this - there is a panel with factory paint, without any prep work, they paint the entire panel with primer, then colour then clear?  If that's what you mean, sure it will "stick" for a year, 2 years, maybe 3 years? Who knows. But at some stage it will flake off and when it does it's going to come off in huge chunks and look horrific.  Of course read your technical data sheet for your paint, but generally speaking, you can apply primer to a scuffed/prepped clear coat. Generally speaking, I wouldn't do this. I would scuff/prep the clear and then lay colour then clear. Adding the primer to these steps just adds cost and time. It will stick to the clear coat provided it has been appropriately scuffed/prepped first.  When you say, "but the new paint is landing on the old clearcoat" I am imagining someone not masking up the car and just letting overspray go wherever it wants. Surely this isn't what you mean?  So I'll assume the following scenario - there is a small scratch. The person manages to somehow fill the scratch and now has a perfectly flat surface. They then spray colour and clear over this small masked off section of the car. Is this what you mean? If this is the case, yes the new paint will eventually flake off in X number of years time.  The easy solution is to scuff/prep all of the paint that hasn't been masked off in the repair area then lay the paint.  So you want to prep the surface, lay primer, then lay filler, then lay primer, then colour, then clear?  Life seems so much simpler if you prep, fill, primer, colour then clear.  There are very few reasons to go to bare metal. Chasing rust is a good example of why you'd go to bare metal.  A simple dent, there is no way in hell I'm going to bare metal for that repair. I've got enough on my plate without creating extra work for myself lol. 
×
×
  • Create New...