Jump to content
SAU Community

Is My Nistune Maxed Out At 310rwkw And Stock Afm Maxed Also?

boobeedoobee
 Share

Recommended Posts

boobeedoobee Community Regular

boobeedoobee

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Tuner can tell you.

Once you know, get rid of AFM and go MAP.( adaptronic or haltech plug in )

That said, you can still go beyond the limits of AFM's

EDIT

I remember Matt saying from there testing the limit is around 370kw for a single z32
Could try a HPX maf, but i would just replace the ecu if you are looking for over 400kw

Edited by jay-rod
breaker1845 Community Regular

breaker1845

Posted
Posted

Either you upgrade the AFMs to Nismo and you retune and get a better result, probably to the point where you max out the injectors/turbos and other components become limited.

Or you get rid of the Nistune ECU and buy another ECU and go with a MAP based sensor and forget about AFMs all together and tune the new ECU to the point where injectors/turbos and what not will be limited.

jay-rod Proficient

jay-rod

Posted
Posted (edited)

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine
Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.
Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Edited by jay-rod
  • Like 1
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Measures the absolute pressure, which in turn allows you to mitigate the negatives of a AFM.

Eg, reverbaration, dirty afm affecting the signal, removes pretty much any limit on max airflow.

Atmos based blow off valve will not stall an engine

Comming off throttle will be alot "Smoother"

A pressure line will run to a sensor ( think of it like a boost sensor ).

This sensor will either be external, or internal to the ECU.

Most plug in ECU's use internal map sensors, and would be what you want.

You then remove the need for a AFM, and take them completely out of your engine bay.

And run a single boost line to the map sensor

Thanks it seems like this is a common question as to which is better? Afm or a plug in ecu which eliminates the afm? The general consensus leads to deleting the afm and spending the money on an ecu? A pair of nismo afm is going to cost 800ish I'm thinking this could be money better spent on an aftermarket ecu
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

My 32 gtr has a Nistune running 310rwkw. It has e85 1000cc injectors hks gtss turbos dumps exhaust.. from what I have read I have now maxed out my afm. I was thinking of buying the nismo afm and getting a haltech ecu. Is this a good option or do I just need to upgrade my afm?

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

You can't tell that your AFM and Nistune is "maxed out" by reading. Your tuner will tell you when that happens. How many turbos and how many afms do you have? I doubt anything is "maxed out" at 310awkw..if your tuner can't tune it because of the afms get a couple of RB25 afms.

Yes a Link would be great if money is burning a hole in your pocket but the ecu, map sensor, temp sensor, installation and tune won't leave much change out of $3k

won't a haltech platinum pro plug and play eliminate the need for any of those?
boobeedoobee Community Regular

boobeedoobee

Posted
  • Author
Posted

Just bought a hpx airflow meter from Nistune. All going well it will be getting tuned on Friday. Nistune say its goo upto 800hp.

What did they cost for the pair if you don't mind me asking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      RB20DE NEO smallbox clutch.

      By Kapr · Posted

      Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...