Jump to content
SAU Community

Recommended Posts

Hi All,


I have been reading around for a while to try and figure out my next mods.


I like something around 500bhp from fly which i think would be around 400 at wheel, right ?


I don't want to go forge or change cams at this stage .


I have seen gt35,30,28 and number of others but not sure what is best for me .


everyone has a different opinion reading around . what would you get and what is the max power from the turbo at what psi ?


I think gt30 is low mount which is good but gt35 or other are high mount and if i was to run gt 35 , I think it will be very lazy as I will be running it at a very low boost , right ?


I think minimum mod to get to 500 bhp is :


550 or above injectors

bigger intercooler

ecu ( link 4)

turbo .


and possibly manifold if it is not straight bolt on as most people say gt30 is .


am i right ?can i expect safe 500bhp from the car with the above cost and mod ?


if I was to do this in stages and buy the turbo and do no remap but run it at low boost , will it work ?


many thanks

Link to comment
https://www.sau.com.au/forums/topic/456224-rb25det-turbo-choices/
Share on other sites

That's what the info is though isn't it?. What people think and have experienced is all over the forum.

You are asking for it to be laid out for you to make it easier for you. Which is spoon feeding.

How did you read for 5 hours and not figure out that an rb25 can easily make that power, that pretty much everyone talks kW, that Hypergear high flows bolt straight on, that a gt35 will be a lag monster etc.....?

You will get heaps of different answers, time to learn and make your own decisions.

You did say you and found lots of dif opinions, so do you expect anything dif from a new thread asking the same thing???

  • Like 1

Here ya go, this should get you started, be warned it may take you more than 5hrs of research to learn all thats needed.

Then again maybe not, it all comes down to you.

https://www.google.com.au/search?q=turbo+choice+rb25+sau&rlz=1CDGOYI_enAU590AU590&oq=turbo+choice+rb25+sau&aqs=chrome..69i57&sourceid=chrome-mobile&espv=1&ie=UTF-8&hl=en-US#q=turbo+choice+rb25+sau+site:www.sau.com.au&hl=en-US

OK. Even though you don't need assurance, here goes.

You can do it. You can do a good job if you out your mind to it. I believe in your abilities. You're really good at cars. Never give up. Don't stop believing. Keep on being you, you are wonderful.

For someone with limited funds you sure have alot of funds to spend, from your recent threads. Anyway you're asking what turbo's best for you? gtx3076 is what you want. And i mean that in a medical sense.

Trust me, i'm a doctor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...