Jump to content
SAU Community

R32 Gtst Kaaz Diff (1.5)

Roy
 Share

Recommended Posts

Roy Grand Master

Roy

Posted
Posted

In perfect working condition. Has done about 40,000kms and had annual fluid changes and only ever ran Castrol Syntrax. Only removed as I am going to bigger driveshafts and GTR rear end.

Supplied as a centre as I want to retain the crown wheel and pinion. If you are after the diff housing then I can supply that for an extra $200 with the 4.11 crown wheel and pinion

Located in Melbourne.

Asking $550 for the Kaaz diff, or $750 all supplied loose with diff housing, flanges and 4.11 crown wheel and pinion etc

Link to comment
https://www.sau.com.au/forums/topic/456441-r32-gtst-kaaz-diff-15/
Share on other sites
  • 1 month later...
Roy Grand Master

Roy

Posted
  • Author
Posted

Wont fit R34 people. KAAZ site says it will fit RB25DET R33s.

I decided to stick with the 4.1 diff ratio in my car so the KAAZ diff has the std R32 GTSt 4.3 diff ratio . All complete but not correctly torqued so whoever buys it can just swap over the centre to their diff or send this unit off for new bearings and backlash adjustment and blt in as a complete assembluy

Have axles for sale here ... http://www.sau.com.au/forums/topic/457869-hcr32-gtst-axles-hubs-lca-upper-arms/

post-462-0-52658800-1435584763_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Starting again

      By MBS206 · Posted

      The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • MBS206
      What brakes on R34 GTT(Europe)

      By MBS206 · Posted

      Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
    • sonicii
      Steering lock/control unit Infiniti G37

      By sonicii · Posted

      Pretty sure it is a common fault. I believe this is the only part you need, but don't quote me as I don't have a V36.  I also believe it is a bit of a pain to change and the device needs to be encoded to the car once it is replaced, so may need someone with the right tools. Buy Genuine Nissan 48700JF00D (48700-JF00D) Lock Set-Steering. Prices, fast shipping, photos, weight - Amayama
×
×
  • Create New...