Jump to content
SAU Community

Recommended Posts

Good plan right there. 25's respond to minimal mods half the time, quality high mount/manifold/gate/exhaust/injectors/ECU. Got one down here putting out 600hp with standards internals bar head gasket and cams

Ever heard of Evanco Mechanical?

Good plan right there. 25's respond to minimal mods half the time, quality high mount/manifold/gate/exhaust/injectors/ECU. Got one down here putting out 600hp with standards internals bar head gasket and cams

My End Goal is 500hp. I don't want/need more than that. (We always say that right?), but that is a long term goal.

I forgot to mention the car has a ridiculous exhaust system (can fit my foot inside the tip ;) )

Oh, here is a photo of the freshly washed R33 4 Door, nearly ready to get some plates slapped onto her. (not embedding because the photo is huge)

Theres so much bird poo burn on her, as well as weird stains that I just couldn't remove and some weird blue-tacky glue stuff that's somehow leaked onto her. My current tools were not able to remove those.

Restorefx in Bibra lake does some pretty awesome work on car paint. Check them out. Edited by colin.ssc

My End Goal is 500hp. I don't want/need more than that. (We always say that right?), but that is a long term goal.

I forgot to mention the car has a ridiculous exhaust system (can fit my foot inside the tip ;) )

I already have a motor that makes a lazy 510hp, wanna buy it off me?

  • Like 1
*WRECKING* new stock, sr20det 180sx
Mandurah, Western Australia

New stock in.

Sr20det, manual, runs and drives, video of engine running/starting is available, comp test will be performed tomorow, and 180sx will be dismantled as of tomorow.

*Notes*
Coilovers seam unservicable/seized, JIC fully adjustable fronts, rears are GAB shocks and springs, non height adjustable, with adjustable dampers.

Has good clutch, think extreme of some description. Nice feel and grab on operation.

5 speed box is good. No crunches or grinds. Smooth operation.

Engine runs/starts fine. No excessive blow by or smoke. Looks to have T25 garette.

Has VLSD and drift pineapples on the subframe.

Greddy turbo timer, blitz BOV.

has majority of rear plastics and carpet side trims, dash mat ect, steering wheel in decent condition if anyones chasing stock gear.

Only 3 rims as one is egged, 17x7 lenso.

Engine (depending on comp) complete $1200

Sr20det wiring loom $100

Turbo manual ecu $100

5 speed box $300

Clutch $200



Very fkn tempting

  • Like 1



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...