Jump to content
SAU Community

Recommended Posts

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost down the line.

Edited by Manne

This job just got a lot more complicated. Turns out previous owner put a gtr fuel pump in the car, which is a lot larger and to fit it they removed the sender. So now Mark has to remove the pump and put a walbro pump in to fit the sender, the bill is roughly ~$500 now.

The plus side of this is I can run bigger injectors and higher boost a big single down the line.

FYP

Fuel pump I installed previously was too big for the tank. Shaved off some of the some of the plastic teeth so itll fit in but it was touching the tank n due to vibrations it hums really loud.

So asking them to take it out and shave it off completely and ditch the rubber piece and use a vice to clamp it all together.

Or just f**king get rid of the humming lol

Bigger exhaust or stereo will also fix the humming

  • Like 1

Bigger exhaust or stereo will also fix the humming

My stereo is mighty loud, exhaust is loud enough for me too....stupid pump is making me think I need a louder exhaust now....but less than $50 vs $2k.....I'd rather choose the $50 option...

Been seeing a few GTT 34 around my area lately....still really want one T_T.....ageing car though

  • Like 1

Ok got Tue car back. Mark from C-red is such a top bloke. We sat down and discussed the car for 30mins going over everything, he estimates 6-8k worth of work already done to the motor. We discussed where to go next and budgets too. very good and friendly service. They out a walbro 400 in and charges for a 202?, as that's all he could get his hands on.

Splitfires, Custom Piping, Oil Filter relocation, Re-build, Candy Apple Red Spray job ;) and some other things I can't remember.

Edit: Memory kicked in - Front Mount intercooler and a bleed valve as well. (theres a couple things he noticed which I did not and I can't remember them)

Edited by Manne
  • Like 1

Morning all

Who uses tapatalk or sau app (Samsung) on their mobs.

Im using the sau app and i like it easy to use, user friendly but i find when i use the http: of sau on laptop it still has more features like if you make a topic it say how many views i get im thinking about taptalk only coz if i wanted to look at antilag.com and other forums that what they want you to use.

Whats your feed back worth trying?




  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...