Jump to content
SAU Community

Recommended Posts

Hold on tight Corey, its going to be a wild ride

 

on the upside, it only lasts for the next 18-20 years.....

 

Had one of the loinspawn join us for dinner last night, and the best bit?

she went home afterwards

 

If anyone needs me, I will be pantsless and farting on my couch :banana:

  • Like 1
Hold on tight Corey, its going to be a wild ride
 
on the upside, it only lasts for the next 18-20 years.....
 
Had one of the loinspawn join us for dinner last night, and the best bit?
she went home afterwards
 
If anyone needs me, I will be pantsless and farting on my couch :banana:


You pantsless on the couch is probably what drove them away

Let’s be honest, it’s not something you started doing recently :)
23 hours ago, Stinky Rooster said:

Hold on tight Corey, its going to be a wild ride

 

on the upside, it only lasts for the next 18-20 years.....

 

Had one of the loinspawn join us for dinner last night, and the best bit?

she went home afterwards

 

If anyone needs me, I will be pantsless and farting on my couch :banana:

I have started storing Dad jokes. Its gone be fun

17 hours ago, t_revz said:

 


You pantsless on the couch is probably what drove them away

Let’s be honest, it’s not something you started doing recently

 

guilty as charged :blush:

3 hours ago, turboedsloth said:

I have started storing Dad jokes. Its gone be fun

in our house, dad jokes have to be lewd and hard to understand

 

example

2 nuns sharing a bath 

1st nun says "wheres the soap"

2nd nun says "it certainly does"

 

 

  • Like 1

morning everyone been a while since replied on here so just a quick hello yep still around am always here lurking in background, anyway i guess more aimed at @t_revz and @Beyond Blue R33 my water pump is showing signs of giving up and a few seals also beginning to leak so its at 170k will be doing the 200k service early, now as WE ALL ;) know the turbo seals will go so that will need a highflow service done shall i just go the ATR43SS2 OR ATR45 or just go highflow? Also as i am still very broken have 2 pay to get service done which gunna be expensive :( . Anyway cheers all 

I’ll do it if you can wait til after my holiday. End of July. Water pump, cam seals tensioners and timing belt etc

 

Don’t need to touch turbo yet. Unless you really want but if your not rolling in cash then do it later.

 

P.s. if your water pump is leaking it could let you down when you least expect it. If it leaks out and you go for a drive it will get hot before you even notice.

Is it leaking coolant? Or noisy? Or what?




  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...