Jump to content
SAU Community

Where Could I Get A Nismo R32 Intercooler?

GSX-R35

By GSX-R35,
in Engines & Forced Induction

 Share

Recommended Posts

GSX-R35 Community Regular

GSX-R35

Posted
Posted (edited)

Pardon me please if this is in the wrong section but I was hoping someone could give me advice.

I have Nismo R32 GT-R #167 and I'm in the process of fixing her back up to her former glory. To that end I plan on adding several Nismo parts. I already have a Nismo clutch going in to replace the heavy-ass one already in the car and upgraded Nismo engine and gearbox mounts. The place I bought the car from gave me a period-correct Nismo wheel to slap on. I got a Nismo 320kph speedo off eBay. Eventually I want to get some other bits like a Nismo gear knob, seat covers, etc.

One thing that eludes me though since AFAIK it's been discontinued is a Nismo intercooler. Since my R32 is an authentic Nismo GT-R I think it would be great to have a Nismo logo proudly showing on the front but where could I get one? All the shops I've cheked online just have it listed as discontinued. Anyone know of anyone who wants to part with one? Any chance Yahoo auctions or another similar site might have one? Any leads would be greatly appreciated.

If I can't find one it's not the end of the world for me. I'll probably go with a Blitz intercooler or similar in that case but it sure would be cool to have an authentic Nismo IC for my authentic Nismo GT-R :)

Oh,and is the R32 intercooler unique from the R33 and R34 or were they all the same, just differing in piping?

Thanks in advance for your help.

Edited by GSX-R35
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

yahoo will have one floating around.

oh also the nismo wheel, if it requires a boss kit to put it on Nismo did make one. They are quite hard to find but hey, nismo!

Sounds like I have to hit up Yahoo auctions then. Thanks. As for the wheel, I do need a new boss kit for it. My car has a Momo wheel on it and I was told the kit it uses won't work with the Nismo because the bolt pattern is different. I'm okay with a non-Nismo made boss kit like a Works Bell or NRG though. You wouldn't happen to have suggestions on which kits from either of those companies would work with a Nismo wheel by any chance or any suggestions on other brands to consider? I've done some research on it but haven't settled on a firm answer since I've been more occupied with sussing out parts for needed maintenance and repainting of my car. I'm hoping to put it in for respray in July and after that restore the interior so the wheel situation has been on the back burner for now.

Anfanee Grand Master

Anfanee

Posted
Posted

I thought Boss kits are universal... What nismo wheel is it? There is a few variations. Mine is sitting next to me currently. I would say you can use the boss kit that the momo is attached to...

infamous_t Veteran

infamous_t

Posted
Posted

The earlier nismo intercooler is identical to an 70mm ARC intercooler, the later one which came out after R34s were released is a 100mm item

The later version is possibly also ARC, but if so it comes in a polished version not normally available from ARC.

I have the early nismo one on my 32.

If you find a R34 intercooler, it will fit, but it just has an air temp bung to use or plug on the drivers side of the FMIC.

GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted (edited)

I thought Boss kits are universal... What nismo wheel is it? There is a few variations. Mine is sitting next to me currently. I would say you can use the boss kit that the momo is attached to...

The Nismo wheel I have is identical to this one (only with the leather in better shape):

minesr32027Medium.jpg

The Momo that's on right now is identical to this one:

car043.jpg

They both have a six bolt pattern but I was told that the boss kit I have wouldn't work because the orientation is different - the Momo has the top screw at 12 o'clock while the Nismo has two top screws at 11 and 1'oclock. Sorry but I don't know nearly enough about aftermarket wheels and boss kits to say otherwise so I'd appreciate the correction if I was told the wrong thing.

Edited by GSX-R35
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

The earlier nismo intercooler is identical to an 70mm ARC intercooler, the later one which came out after R34s were released is a 100mm item

The later version is possibly also ARC, but if so it comes in a polished version not normally available from ARC.

I have the early nismo one on my 32.

If you find a R34 intercooler, it will fit, but it just has an air temp bung to use or plug on the drivers side of the FMIC.

Thanks for the info. So with the R34 IC (if that's what I can find), that air temp bung can be closed off for use on the R32 and no other modifications needed? Just want to make sure I understand correctly.

GTSBoy Grand Master

GTSBoy

Posted
Posted

They both have a six bolt pattern but I was told that the boss kit I have wouldn't work because the orientation is different - the Momo has the top screw at 12 o'clock while the Nismo has two top screws at 11 and 1'oclock. Sorry but I don't know nearly enough about aftermarket wheels and boss kits to say otherwise so I'd appreciate the correction if I was told the wrong thing.

Given that the top end of the steering column is splined, I would have thought that adjusting the alignment of the boss would be to the resolution of 1 spline.

  • Like 2
Anfanee Grand Master

Anfanee

Posted
Posted

speaking of nismo intercoolers....

yes they are rebadged ARC items.

also here you go.

http://www.importmonster.com.au/view?url=http://page10.auctions.yahoo.co.jp/jp/auction/m134338077&thumb=http://auctions.c.yimg.jp/img259.auctions.yahoo.co.jp/users/6/0/7/0/yasu32gtr2000-thumb-1422405752972785.jpg&title=GTRGT%20RnismoBCNR33ARC

GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

Given that the top end of the steering column is splined, I would have thought that adjusting the alignment of the boss would be to the resolution of 1 spline.

same nismo wheel i have ^^

The boss kit should work. What GTSBoy said^^

Thanks for the info. I'll have to pull off the Momo wheel when I get a chance and see what's up.

I saw that auction when I did a quick search on another Yahoo auction search site. I wish it had pics that were more close-up cause it seems to have a lot of bent fins.

JTCC Community Regular

JTCC

Posted
Posted (edited)

that is a very early model nismo intercooler that is made by ARC. Those are pretty rare also. I emailed for better pics, but no response. It does look pretty beat up, so I passed as well. It has been up for a very long time. I bought a decent newer style r32/r33 off the auctions. Only one i've seen in about 6 months.

After some fin straightening

YgLeT8O.jpg

It looks different than my ARC intercooler. Notice how it triangles out between the rows of fins . I dont remember that on my nismo. I am not home, so I cant check.

enSwiir.jpg

9y8Cn2m.jpg

Edited by JTCC
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

that is a very early model nismo intercooler that is made by ARC. Those are pretty rare also. I emailed for better pics, but no response. It does look pretty beat up, so I passed as well. It has been up for a very long time. I bought a decent newer style r32/r33 off the auctions. Only one i've seen in about 6 months.

After some fin straightening

It looks different than my ARC intercooler. Notice how it triangles out between the rows of fins . I dont remember that on my nismo. I am not home, so I cant check.

Yeah, I wasn't digging the condition of that old Nismo. I don't mind it's an earlier style since it's period correct for the car but it just looks pretty worn. If it were a lot cheaper I might bite but not for $1K.

What are you planning on doing with your ARC now that you have two intercoolers? Are you considering selling it?

JTCC Community Regular

JTCC

Posted
Posted

Yeah, I wasn't digging the condition of that old Nismo. I don't mind it's an earlier style since it's period correct for the car but it just looks pretty worn. If it were a lot cheaper I might bite but not for $1K.

What are you planning on doing with your ARC now that you have two intercoolers? Are you considering selling it?

Its on my rb25 s13.

r4Zp0JR.jpg

  • 1 year later...
GSX-R35 Community Regular

GSX-R35

Posted
  • Author
Posted

I have one for sale brand new in box. $3,400 plus shipping. contact me through instagram at superb_rated

Dang, that is a very pretty IC! The want is strong but unfortunately I don't have the budget right now with my build still finishing up. I'd be interested if my build were finished but that's still a couple of months away by my estimate.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

    • davemoto63
      My new to me M35 Stagea wagon

      By davemoto63 · Posted

      Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • silviaz
      Steps to DIY sanding car back ready for respray....

      By silviaz · Posted

      I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...