Jump to content
SAU Community

Recommended Posts

1 minute ago, RICE RACING said:

^ Why only run 19psi on E85 when you can run 27psi on 98 oct with a non gameboy nintendo ECU mate?

FAKE NEWS KENT LOL ;)  'gay stories' hahaha

Where has this gameboy dicksmith ecu stuff come from?

 

Just now, admS15 said:

Wow, mind blown. Please sell me your ecu and callibrate it for me son of rajab Rice. I will forever feel privileged i you, your wankness.

HALALtech user maybe?

Wow kents you all exceeded my expectations of full retard, good luck with gagtube wikkipedo and goolag serches for knowledge, fark yeah aids 2018 in full swing here from generation zero LOL.

 

46 minutes ago, RICE RACING said:

This is where I ask: what age are you and what do you do for a living LOL :)

You have no idea of WI let alone I would say much of engines and I can confidently state you know farking NOTHING about my systems or how how they work kent ;)

This is where I get to laugh at you.  I am quite likely older than you.  I am a combustion engineer.  I mean that literally.  I work for one of the best combustion companies in the world.  Big burners.  I know how to burn EVERYTHING.  We treat methanol as a waste fuel (in pulp & paper mills for example).

I can tell you that I have the ability to design a WI or WMI system on the scale of your little engine, or I can design one (like the WI system I designed for a pair of natural gas fired rotary kiln burners for NOx control) at the 80+MW range.

You should just get back in your box.  You're not playing with teenagers here, f**kwit.  We know that WMI and E85 are damn near equivalent.  One eyed cloud yelling like you've been doing is just funny.

  • Like 5

So apparently your systems dont run out of water or methanol? 

Spraying water and methanol into your motor has no detrimental effect on oil either? 

Simple questions really. Answer them!

If you knew anything about E85 you'd know there would be sweet fark all difference between an E85 & E49.5 tune.

Since you're talking about road cars are you really gunna feel 15kw difference up top on the street? Highly farkin unlikely kent!

 Go scrape some water outta the gutter you're laying in then jump on ya jizzphone to find some methanol to fill ya plastic tanks up so you can run high boost!

Take ya clunky Syvecs ECU's and ya aquamist plastic tanks and fark off!

For shits and giggles heres a google search.. Yep Methanol is readily available in Sydney ?

 

Screenshot_20180103-113640.jpg

riceracing

my car will be finished in approx 6 months...yes itll be on e85.

line me up and ill destroy ur water injected rotary ricebox.....

i would love to race you & show you whos boss, every time i snap a gear ill be gaining car lengths.....

i'll be sure to bring a camera crew with me to proove who the real ricer is PAL

E85 SR20 > WI 13B

WoW. That escalated quickly! This thread was just meant to shine some light in the benefits of water and water meth injection, not to bag on e85 or those that chose to use it or to say water injection is shit because you choose to use E85. Each to their own. For those who have readily available pump e85, it's easy to see that the choice is a no brainer. In fact, we would have probably been using e85 from the get go if it was readily available locally.  But for us and many others, this is not an option. We live in Cairns for almost 2 year and with no pump e85 available, drum e85 or wmi were the only other real options to run the power levels we wanted. Even now being back in Sydney, E85 isn't available in our local area or on any of our daily routes. So for our application and situation, wmi was the better option. A 20l drum of meth is $89 delivered through VPW. A 5l tank of 50 50 water meth last about 3 months of street driving. A night of roll racing, 12-13 runs, uses about 1.5l.

Both systems have their advantages and their disadvantages but are both proven winners in terms of increased performance. In fact, what some are seeing as the biggest winner now is a combination of both e85 and water injection. In these situations, pre turbo and post intercooler water or water meth injection is add to a vehicle already running e85. The e85 takes care of your in cylinder cooling and knock suppression, while the water injection keep IATs low and stable and increases the mass flow of the turbo. This type of set up would work extremely well for those who drift or love doing big burnouts, where a lot of time is spent at wide open throttle at relatively low vehicle speeds. 

We are happy with the decision to utilise water injection for our specific application. We are always willing to share and compare ideas and results of different systems and technologies as this creates a positive medium for development. 

Happy boost all, no matter you preferred jungle juice. 

Cheers 

  • Like 6

Hi Rice Racing, you may have confused SAU with other internet forums. Cut the personal attacks and enjoy your time here.

For now this is just a warning but the next personal attack will result in banning.

3 hours ago, GTSBoy said:

How nice it is to read something written by someone who can see both the wood and trees!

Thanks ;)

I know its hard for lots to accept that WI is superior to the ethanol time bomb chosen mistakenly by some here.

9 hours ago, GTSBoy said:

This is where I get to laugh at you.  I am quite likely older than you.  I am a combustion engineer.  I mean that literally.  I work for one of the best combustion companies in the world.  Big burners.  I know how to burn EVERYTHING.  We treat methanol as a waste fuel (in pulp & paper mills for example).

I can tell you that I have the ability to design a WI or WMI system on the scale of your little engine, or I can design one (like the WI system I designed for a pair of natural gas fired rotary kiln burners for NOx control) at the 80+MW range.

You should just get back in your box.  You're not playing with teenagers here, f**kwit.  We know that WMI and E85 are damn near equivalent.  One eyed cloud yelling like you've been doing is just funny.

When my wood heater needs repairs I'll send you a PM if you can fit me into your busy schedule mate ;)

1 hour ago, Duncan said:

Hi Rice Racing, you may have confused SAU with other internet forums. Cut the personal attacks and enjoy your time here.

For now this is just a warning but the next personal attack will result in banning.

Apply that standard at the start to the clowns who called me a troll or were saying I am selling something mate, and happy to stay and educate the masses. Otherwise its looking just like every other forum that is biased towards inept commentary and one sided treatment and attacks applied to people who are not part of your inner circle.

Irony of that is you wont learn from experienced people like myself who come in here when time allows to share 'relevant' industry experience, compared to drinking the cool aid self worship introspective love fest of narrow mindedness I have witnessed so far.

Not one person has address any of the proven shortfalls I listed of their beloved Ethanol not a single one.

But many have jumped on the bandwagon to react in a poor fashion then try to deride other alternatives and products, that sir is poor form and shows only the lack of intellect and respect on display so far. Lest see if they all can improve otherwise you will be stuck living in a narrow world view that is not much more than fake news or self validation at its finest ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...