Jump to content
SAU Community

Recommended Posts

Hey guys, just needed some feedback. Currently got a Takashi 600x300x68, was thinking of going 100mm core to not restrict flow but it doesn't seem to clear. Thinking a 78mm core at the moment, nothing major just like a JustJap cooler. Was just wondering if the 10mm would make a difference and if it's worth it ? Have a R33 rb25det

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/458250-intercooler/
Share on other sites

Stao's results are interesting, for some reason the R34 GTT seems very sensitive to any sort of restriction. I know with the standard SMIC, mine was horrible. It doesn't quite make sense why the motor is so sensitive but it seems to be an R34 thing.

Plenty of people seem to have made around 300kW on 68/78mm coolers on the R33.. check dyno results and hypergear threads. Whether their results would have another 20kW with a bigger cooler, who knows.

Link to comment
https://www.sau.com.au/forums/topic/458250-intercooler/#findComment-7568895
Share on other sites

This is the issue I have when people do back to back tests, they only ever relate to their setup, not any other car, and unless you are measuring temp pre and post cooler you have no idea how much the temps are actually dropping in these situations. I run a cut down 220 x 600 shitty old Jap cooler I ran through the band saw, no dramas here. Would I get a better result with a 100mm core, most likely, but with added lag, plus there is no room to fit it on my car.

If these chinese/Jap coolers actually restricted flow we would know about it, as no-one would get decent results with them. More likely the turbo is out of efficiency and heating the air too much, as that is what I would expect from taking a compressor to it's limits.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/458250-intercooler/#findComment-7568936
Share on other sites

Hey guys, just needed some feedback. Currently got a Takashi 600x300x68, was thinking of going 100mm core to not restrict flow but it doesn't seem to clear. Thinking a 78mm core at the moment, nothing major just like a JustJap cooler. Was just wondering if the 10mm would make a difference and if it's worth it ? Have a R33 rb25det

Thanks in advance

I have the 78mm cooler from just jap, and have return flow piping as well although that is a custom job, made 320rwkw at 22psi on my R34. My tuner said that was getting close to the limit for the cooler, temps were starting to climb but nothing outrageous.

Guess it depends what you wanna use it for. 350kw in a street car it would be fine, but if you're planning a lot of track days on 98 maybe it's worth it to go 100mm

Link to comment
https://www.sau.com.au/forums/topic/458250-intercooler/#findComment-7569386
Share on other sites

Do the R34 Neo specific issues disappear if aftermarket or R33 inlet manifolds are used ? I keep wondering if the I think smaller Neo inlet plenum section is working against performance and needing higher boost pressures (and compressor outlet temps) to push beyond 300+ .

It would be interesting to hear from someone that say put a Neo 25T engine in an R33 with the 33 inlet manifold system .

Long shot but 33 inlets could be a cheap upgrade on Neo's pushing beyond 300RWKW .

Link to comment
https://www.sau.com.au/forums/topic/458250-intercooler/#findComment-7569678
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
×
×
  • Create New...