Jump to content
SAU Community

Recommended Posts

Now see I have never removed my inlet pipe to do the plugs.......its - like kinks said - doable without too much trouble.

A socket that fits is wwwwwwaaaaayyyyy cheaper [say $100 max] than a ffp and all that hot gear your looking at. And now that I've reduced your mod costs by $1000+ you can now afford that flash new turbo.

And as everyone says 300rwkw is more than achievable with the std plenum, there are people on here with a fair bit more than that and still running with the OEM.

Run bcpr7eix @0.55mm and plug changes are literally non existent (tri yearly operation..) factory plenum works fine into the high 300s.

GT3076 0.82

or hypergear G4 SAT

A GT35 will do 400rwkw on E85

So a fair bit further from your 300rwkw. It'll also be well outside a lot of the other parts you've already fitted.

Stick to the "around" 300rwkw, don't go for more.

  • Like 1

Can confirm factory plenum (at least on R34) is good for well over 400+

The difference in ACTUAL speed of a car is really not much AT ALL between 300 and 400 due to soooo many other things suddenly becoming a variable. A punchy as possible 280 is what you want unless you are willing to go full retard. A bolt on, IWG solution is the smart solution. Spend the rest of the money for your build on making the thing turn, drive well, stop, etc and you will have MUCH BETTER CAR.

Source: MY WALLET.

That atr45sat, that's the direct Bolt on for the rb25det? And if I'm not mistaken that's close to a gt3582r? If so I've chosen my turbo :)

That is a direct bolton turbo except u will need induction pipe and a silicon elbow plus 4 longer manifold studs. power level is close to a 3582 but similar response to a 3076 in .82 rear.

Well I've planned to put 1000cc injectors, walbro 460 fuel pump when I do the turbo anyway but I don't really want to touch the internals just yet so I don't want to push 300rwkw too far and it's just had new fuel lines put in it so should be good to run on e85

I also am running well over 300kW on the stock plenum and also stock exhaust manifold :)

No need for fancy shit, save that money for rack and tits

Isn't time a funny thing... 10 years ago, people would point and scream liar at a 300kw rb25 with stock manifolds.

Rack? Or Crack?

Isn't time a funny thing... 10 years ago, people would point and scream liar at a 300kw rb25 with stock manifolds.

Rack? Or Crack?

E85 was readily available here that's why, water meth boys did 300kW+ though

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...