Jump to content
SAU Community

Recommended Posts

Hello ladies and gentlemen. If you own an R32 here in the US you probably already know that it's not exactly the easiest car to own and maintain largely because of a lack of widespread resources and info here in the land of apple pie and easy gun ownership. I know from my own experience that I would have had a much harder time getting my R32 GT-R registered if it hadn't been for the assistance of some wonderfully helpful JDM car owners here in my state of Arizona. Since then I've started my blog 23gt.blogspot.com to help spread info about JDM car ownership in the US to prospective and current owners but I can't possibly answer every question of course.

So, here's what I'd like to do – if you own an R32 or other JDM imported car in the US I'd like you to contact me if you'd be willing to help others out if they have questions about their own cars that they are importing or have already imported. Since registration and ownership situations can vary greatly from state to state I'd like to compile a list of owners who can help someone out if they have trouble, preferably someone who lives in the same state or at least in the same part of the country.

There would be two situations you would probably be called on to help:

  1. Someone has a car on the way or already here but needs help getting it registered.

  2. Someone needs help finding a good shop locally to get their car inspected or fixed.

I may contact you to help with other issues but only if it's appropriate.

Email would be the preferred contact method but if you have an alternate way you'd like to give (such as PM on a forum) that'd be great too. What would basically happen would be if someone contacts me through my blog or a forum I go to, or if I see a forum post asking for help you would then get an email from me asking if I can share your contact info with that person and extend an offer to help them out. I'd just like you to share your knowledge, I don't expect you to do anything financial or anything like that and won't hold you to a standard – just the fact you're willing to help another person out is enough.

So what'll happen would be something like this (this is just an example mind you): I see someone on SkylineOwnersAnonymousAndOnlineDating.Com who posts “Hi! My name is Stacy and I'm an ex-porn star and I just imported an R32 Skyline but the DMV won't let me register it even after I flashed the clerk! Helps me plz!”

You'd then get an email from me saying “Hey, have you seen this girl Stacy with the R32? She's hot! Here's some links to her vids! Oh., and you wanna give her advice on getting her car registered?”

Only after you give me the okay would I then share your contact info, discreetly by the way so you don't get more emails from Nigerian princes and male enhancement vendors (I won't just post your email publicly – I'll either post mine and ask them to contact me or send a PM).

So if you'd like to participate in this charitable endeavor and help the Stacys of our country then please contact me by PM, email me at 23gtblog(at)gmail.com, or post in this thread how I can contact you. Here in Arizona, I have someone already on board besides me but more people would be appreciated of course. I know SAU doesn't have a lot of activity from US owners right now but I hope I can get some interest from here as well.

Thank you very much,

Oliver

P.S. Please participate only if you have a 100% legally imported JDM car. This isn't because I have anything against quasi-legal cars but it's for your safety and the other person's. If your car isn't quite legal then you probably shouldn't advertise it by sharing your contact info with others. At the same time it's not good if prospective owners get advice that's not quite on the up-and-up. Thanks.

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/458553-paying-it-forward-r32-edition/
Share on other sites

  • 2 months later...

Genius post, I'm located on the east coast of the united states and currently trying to source an R32 GTR. I've bookmarked your blog in preparation for what to expect!!!

I hope you find the blog helpful then in your search and subsequent ownership! :)

  • 1 month later...

I recently have purchased a skyline. I live in New York.

I bought my car from a dealer in Richmond, VA.

www.Japaneseclassicsllc.com

Since I got my car from this dealer I did not have to do any importing or all that jazz. I simply went emailed them to get the car, called to make an appointment for a test drive, and went down to seal the deal. This was in no way different then buying any other car.

The guys I got my car from are a fantastic group of people. I have nothing but good things to say about them. The process was simple and stress free. It was a pleasure to do business with them. They even work with a financing company!

If anyone wants other info just pm me.

?

  • 5 months later...
  • 2 weeks later...

Patrick Harris

In Lafayette Louisiana.

My brother owns a shop in Scott Louisiana about 3 minutes off of I-10. I'm SURE he or I could help fix your skyline after doing mine!

His shop is Harris Automotive Services, Scott, LA.

  • 2 years later...
  • 4 months later...
  • 1 month later...

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

U4KP6sw.jpg

My car for reference! In the process of doing a "Type MR" conversion which was an extremely limited run of GTSt made by the Kanagawa Dealer for the 35th Anniversary of the Skyline. It was essentially a standard GTSt with a GTR grille, hood and rear wing with a special badge on the trunk but otherwise unmodified. Apparently it was limited to 200 cars.

Edited by Hcr32typem
  • Thanks 1
Just now, Hcr32typem said:

I'm Dan and I have a 92 GTSt Type M from Connecticut. Mechanic by trade and spent a lot of years in the performance world. Still learning about these cars but I'm always happy to jump on and help if someone needs the assistance!

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

49 minutes ago, SeanR32GtSt said:

Ever had an issue with the car not wanting to HOT start? After some driving turn car off, go into store come back and start it and have to hold the throttle down for few seconds to keep it running. 

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Edited by Hcr32typem
22 minutes ago, Hcr32typem said:

Actually I had a similar problem. Itd cold start fine but then hot start like crap. 

Is your car running very rich? Do you smell excess fuel when it does start?

My issue ended up being the fuel pressure damper at the front of the rail (read: against the firewall. RB rails feed from the firewall and exit through the front and the fuel pressure regulator). The diaphragm had failed and fuel was being forced through the vacuum lines and into the intake before the throttlebody.

 

R19b1qZ.jpg

Pull this line off and see if there's an fuel in it.

Check hose after engine is hot or cold?

Eitherway, you should either have a small puddle or you'll smell fuel residue

Mine youd have to crank the engine and put the peddle to the floor to "catch" the engine or it would die and you have to crank it for an extended period (15 seconds or so)

Edited by Hcr32typem

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Comparison of the 2: Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
×
×
  • Create New...