Jump to content
SAU Community

Recommended Posts

I believe he has paper work etc.

So are you saying a new boot lock is all that's needed? That doesn't seem too bad at all. Thanks for that.

It's currently making a bit less as he has the silent exhaust on it, 411hp, around 310 on 18psi.

He's going to put the Tomei back on and have it dyno'd/checked/retuned at 20psi.

Power seems about right on 98 octane. I have no e85 from the pump here so 98 is fine for me.

http://www.sau.com.au/forums/topic/407595-how-can-i-open-my-boot/

I believe so, check out the above link. I know you can rekey the ignition to match the existing key, but wasn't sure about the rest of the car.

Yeah I assumed 20psi and checked with the dyno thread, there was one with -5's and similar mods pulling 350 at 20psi.

Get some more photos when you view the car, would be good to see how you follow this one through - daresay if you end up buying this one, i trust that there will be a projects thread?

No actually, I'm not looking for a big project/build. This will be a weekend/once a month car and the occasional track day to experience it at full noise safely (will add oil cooler).

I have a build thread for my track car over on NS which gets flogged a lot harder than this will.

Haven't had any response from Jap History check yet, only the auto email to say we'll do a preliminary check and come back to you.

I'll be on Holiday from the 18th and will be within 4.5hrs drive of the cars location during that trip so I'm contemplating driving up on one of the days to see the car rather than waiting til early October and having to fly.

I also received this, I'm awaiting more info on proof of parts used (pistons bearings etc).

post-23873-0-67861100-1441753908_thumb.jpg

Edited by ActionDan

They do a preliminary check to make sure they can source enough information before they carry out the check.

They do this because some history of cars dating back a certain year is not available and they can't always find everything.

So instead of charging you to find nothing they check first before billing you I guess.

You just need to be patient. Overall probably took 1 week roughly to get all the documentation I needed from initial request.

Got a reply from jap history and paid (got a 10 discount lol).

Preliminary details show car leaving in 2008 from HAA Kobe.

Pretty sure he said he bought it in 2011 but has all the paperwork - dereg etc so will be interesting to see if it matches.

Also confirmed rb30 short motor included. Spool parts apparently, he's finding receipts but said he still has the boxes for pistons etc.

Will add some more photos he sent me tomorrow for you guys to critique, including undercarriage.

the history check will confirm the kms but as far as imports go you really have to judge the car on its merits regardless of kms.

if the respray and engine set up dont bother you, id be interested in ensuring the car is straight/accident free.

you have the remeber the sort of car you are buying. its a sports car that was built to be murdered on the street and track. its not going to be perfect.

it comes down to preference. buying a modded car is cheaper from the get go but personally id prefer to purchase an honest original car and tidy it up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It says 300ZX, does that make it an Aus delivered car? Funny how back in the day I just couldn't care less about Z32's and these days I am just in love with them. Back when Nissan was into pushing the envelope. 🤣
    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
×
×
  • Create New...