Jump to content
SAU Community

Recommended Posts

OK more pics.

Underside looks reasonable. I also spot nismo pillar garnishes.

He was showing me the centre trim wrap as I spotted a poorly done job in a previous photo, he said he;s now re-done it. If need be I can replace those parts but I'm not totally against it.

That exhaust looks loud 0_0

Couldn't spot any obvious signs of rear impact either (given boot lock difference mentioned).

He mentioned replacing the rotors and pads as the old rotors had a small groove and he didn't see the point in machining them when new ones were so cheap (they are only RDA rotors but Project Mu pads). He said I could also have the old pads which were nearly new.

Oh and he was happy with my comment of the asking price if it included ALL spares (inc the motor). A spool rb30 rebuild kit starts at 2k, the machining was 2k, so surely the assembled short motor has to be worth 3-4k.

post-23873-0-59734900-1441922668_thumb.jpgpost-23873-0-27941100-1441922670_thumb.jpgpost-23873-0-97504000-1441922672_thumb.jpgpost-23873-0-89804200-1441922674_thumb.jpgpost-23873-0-89661600-1441922676_thumb.jpgpost-23873-0-47614400-1441922679_thumb.jpgpost-23873-0-31829100-1441922682_thumb.jpgpost-23873-0-31671900-1441922684_thumb.jpg

Edited by ActionDan

I saw it first....

53k including all the spares.

original turbos, injectors, a spare hks silent exhaust, 2x rota rims, the rb30 short motor, power FC, etc

Edited by ActionDan

I'm getting a lot of comments on Facebook (where I have a wanted to buy) and from people offering me there cars that there's no way in hell that I'll get anything remotely good for under 60k and that all cheaop GT-Rs are cheao because they are dodgy/crashed etc.

How rife is that within this market?

I was suspect about the respray hiding damage and will never really be able to tell, but if the k's are genuine and the car presents nicely etc, what else am I missing?

Based on everything I have seen and what you are getting seems like a good deal.

Yes that exhaust is loud.

However, pictures only tell so much.

Things to consider with this car,

The standard turbos need to be binned!

By selling the spares you will basically fund a replacement fuel setup and turbos for a daily 300ish kW.

I would just sell them off, i wouldn't keep them. It has -5s

It seems to have a decent enough fuel setup already and is support 340 or so rwkw.

My goal would be to sell the spares and leave the money sitting there for a stroker purely for ease of fitment as the 30 requires a fair bit of fabrication to work.

Edited by ActionDan

If it checks out compression wise and I like the car when I inspect it, I'm leaning towards that.

Godzilla Motorsport (where the car is going for a check over/tune) won't answer the phone though.

Edited by ActionDan

Seems good from pictures and information you are being supplied is good. People tend to avoid most/some of the questions you have thrown his way.

If you can't fault the car when you get up close and inspect well, then the price he is offering is good. What he has valued the car at could be completely different to what another seller believes it is worth. The important thing to take from it is that the history check from Japan will identify any issues before import and you can usually work out if a crash/impact has occurred while here.

Personally if I was in the market for a car like this, the price he is asking is good, tasteful mods already and some spare stuff you can use or sell off. Take the plunge and personally look at it yourself and then be ready to make the call when you are there.

I do, and limited use, and stored in shed not garage, behind locked gates etc. Rating 1, all that jazz.

As for the car, I'm inspecting on the 22-23rd or so, will leave deposit if I like what I see.

I'm trying hard not to get excited so I don't get disappointed.

Already pricing NACA duct through Terry's guy.

Working out if I clear coat the wheels (I like gloss) or just sell for something gloss with better fitment (they seem a little tame offset wise).

I applaud your plans for the car but just as you said, decide that once you're holding the keys.

Hope this is the one for you but just time wasted planning if its not I guess.

Not to digress too much but seen your threads about 33/34v35, was dollars the factor in picking the 34 or otherwise?

I would only take a 35 if the price was right, I thought I had one lined up but it appears to have fallen through and the potential seller is no longer responding (cold feet perhaps or maybe it was easier for him to trade the car in as he said he might).

I only considered that as it was a great price, If I had to buy at market value, it would be hard for me to justify 90k+ sitting in the shed getting the rare drive so I backed out of that option. Rare because I have a 2.5yr old and am very reluctant to put a baby sit in any GT-R I buy and damage the rear seats.

Then it came time to choose between the 33 and 34, the big issue there is head vs heart. I owned a Series 2 R33 V-Spec, loved it, but always wanted a 34 purely for the interior and exterior aesthetics. I know they are line ball performance wise.

For 20k less I could have a 33 that's fully built, and that's a hard option to pass up knowing the rebuild costs of a blown RB26.

Bottom line though, as this is a buy it and keep it car, I've always REALLY wanted an R34, in that colour, with black wheels.

IF we say I can make 3-4k on the spares, surely more but let's keep it low. That becomes a fairly nice 34, series 2 no less, for 49-50k, that seems like good value.

Yeah theyre priced around double the R34 GTR plus transfer fees/insurance higher also.

Value wise, it's definitely priced well and with all the additional parts you could sell off. There are almost as few r34 gtr's for sale these days as r32 gtrs at least on carsales.

See how things weigh up, I'm a technical bloke, I buy with my head and build it with my heart.

Oh and have any of you gone through the process of adding the v-spec sensors to the car (exhaust and intake temp).

I've read this can be done by buying the physical sensors then putting the MFD into diag mode.

Alternatively, has anyone fitted the Nismo option MFD PCD as I will defs be running more than 1.2bar of boost.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks everyone for the replies and suggestions. Got the seats out (hoping I could find some existing grommets but no such luck). By tapping and measuring etc. I could figure out where I could drill through if needed. But first I borrowed an inspection camera and managed to go through factory holes in the chassis rail and could see that the captive nut was holding steady which is why it could retighten. So it was indeed a stripped section of thread, so I applied downforce by levering the bolt head with a screwdriver and went slowly back and forth until it came out. Camera helped a lot cos I could monitor that the captive nut was holding tight. Now I just have one very seized main subframe nut to tackle 😅
    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...