Jump to content
SAU Community

Recommended Posts

No idea of the condition, but it does seem like a good base to build, local-ish is also a step in the right direction

http://www.gumtree.com.au/s-ad/lynbrook/cars-vans-utes/r34-gtr/1087776979

All the best with your search, this is one of my fav threads at the moment, only second to the R34 picture thread

Sorry to hear about that mate, been checking with this thread for ages haha

Ooooooh nice! :yes:

Spoke to the owner, he's pretty unhappy, not with me, but in knowing that the car has been in a hit.

He mentioned that the panel beater who painted it couldn't fault the car and that he was going to strip it down on that side to inspect it himself and would take photos, for me and for his own records/peace of mind.

Encouraged me to come and inspect it myself and said he had nothing to hide etc, I said I am not positioned to comment on the quality of structural repairs and that while photos would be good, at this stage I was reluctant to want to proceed.

Further compression test this morning from the road worthy mechanic, not the tuner, also came back without issue.

I said I'd forward on the full details for him when I had them from the check and that he was welcome to send me more photos, but that ultimately I was now stepping back.

When I have the full report I'll make a final call but I don't really like the idea of risking it.

Is there a dollar value that this could would sell for that would make it worth it? 40k? 30k?

It would depend solely on the potential buyer. If the buyer is after a mint museum piece for a 14 year old car, then they would turn down any example with repairs.

Now that you're armed with the knowledge and you might find the repairs acceptible and send it to a specialist to check the vehicle structurally for safety (as a replaced panel isn't going to be a problem).

I used to be picky at everything until I realised that you have to adjust to the age of the car, cant expect any 14 year old car to have a flawless history like a 4-5 year old GTR would.

Pricewise will still largely be the same, there will eventually be someone who will accept the repairs and not see it as critical (its not like the car is verging on undrivable) albeit for a slightly lower price but nothing like 40k.

I think for $30k it would sell in a matter of days.

I was in a similar position to you early last year except I was after a standard pristine 34 V-spec in BSB... Which a mate had and would've sold cheap to me.
Ultimately I didn't do it as having had 32s and 33s before, seemed hard to justify.

I bought a Honda instead...


Keep thread updated man, keen follower haha.

Well everyone who has read this thread will probably be against purchasing the car if you don't purchase it.

This is why the checks from Japan are important before buying these cars because you'll find a lot with history that you did not expect.

As okooko said, someone might be inclined to buy the car if they are not concerned too much about the repairs. Being realistic if they are done correctly and the vehicle is structurally safe then there shouldn't be an issue.

These cars are getting old and hard to find pristine condition now so if you want one you have to wait or bite the bullet and find one that has minimal work done to it I guess. Structural repairs are hard to comment on as you said, need a professional to look at it to determine the quality, cosmetic repairs not much of an issue. Rust can be just as bad as structural repairs depending on severity.

Sad to see the outcome for yourself and the owner as he now knows of the history, which isn't a good one. But it definitely reinforces the need to do background checks on any serious purchase as you'd hate to find out this information later on once you've bought the car.

Please tell me it was an NSX.

Got offered 2 other cars. The 34 is a 2000 vpsec (grey interior :( ) but has all the fruit for 480hp or so, is currently at racepace so I can speak to chris about it. under 50k's supposedly still has factory rotors so beleive to be genuine (of course would check). Also missing skirts and rear pods. Seats are up to 2k just for the fronts and I would want black, but I could just as easily buy nice race seats for that money or less, but then need black rear interior. Also needs MFD film replaced as is common.

The 33 is a wild card, looks like a beautiful series 3 in my choice of wheels and colour and a built 26/30 with 500kw 0_0. Apparently wants 34 money for it though but said he has spent 140k on it and "everything is new and pristine".

post-23873-0-40228400-1442375688_thumb.jpg

and

post-23873-0-20880100-1442375484_thumb.jpg

Edited by ActionDan

Please tell me it was an NSX.

Got offered 2 other cars. The 34 is a 2000 vpsec (grey interior :( ) but has all the fruit for 480hp or so, is currently at racepace so I can speak to chris about it. under 50k's supposedly still has factory rotors so beleive to be genuine (of course would check). Also missing skirts and rear pods. Seats are up to 2k just for the fronts and I would want black, but I could just as easily buy nice race seats for that money or less, but then need black rear interior. Also needs MFD film replaced as is common.

The 33 is a wild card, looks like a beautiful series 3 in my choice of wheels and colour and a built 26/30 with 500kw 0_0. Apparently wants 34 money for it though but said he has spent 140k on it and "everything is new and pristine".

attachicon.gif11990806_1001586756553364_374099545_o.jpg

and

attachicon.gifunnamed.jpg

:yes:

Get a 34 IMO.

33s are great too but too many bunky S1/2s bring value down if you're thinking future resale.

If the 34 is a good one, you'll easily get part $ back from selling existing stuff and replacing it with what you please?

Or go buy that purple nsx on carsales.

I would sell the interior and the wheels. There's nothing else on it that could be sold.

The wheels would hopefully be a swap/sell enough to get something like what's on the 33.

The seats would go towards series 2 interior or black race seats with series 2 rear seats.

I'd then need pods and skirts and an MFD.

He's also asking more and it doesn't have spares like the gun metal one.

Edited by ActionDan

Given your preferences (interior color, power level, price range etc) you might be looking at more examples than the normal buyer would. Given the number of 34's for sale these days you might be looking for a little while to get one that ticks about 80% of the boxes and obviously 100% of the mechanicals/structurals.

Depending when you expect to have a car in the garage, I'd just keep and eye out, learn more things to look for after each car you see. When some good ones come up, have a more indepth look but be prepared to move quickly on some.

I second buying an NSX.

There's wiggle room on the r34. He has all original log books etc.

The 33 would need to be cheaper than the 34 for me to logically consider it.

Just can't justify 34 money on the previous model. Built or not.

Even a mint series 3 is not going to appreciate much if at all because its a 33.

Are you buying this car to drive at all or just sit in the shed? Sounds like you want to get a good condition one and hold onto it and re sell later for a profit.

If you enjoy the car in its current state do you really care about its resale value?

I plan on keeping my 33 for a long time but don't expect to sell it in the future for large sums of money.

Same if I had a 34, enjoy the car for what it is now and look after it, not with the intention of resale value later.

In general cars never appreciate in value, 34's have changed a bit but the main reason is due to popularity from media.

Thats not a bad plan.

Ultimately the resale value will fluctuate with demand/rarity but also if effected by how you maintain/drive/modify the car during your ownership.

as breaker1845 said, cars that appreciate are only the ones that are limited edition, low production, old, high demand due to various influences, or bit of everything.

If you buy a $50-60k GTR today and sell it in 5 years, given its relatively young age and the price of GTR's in comparison (~$60k for 09-11 at a guess in 2020?) it would need to be an outstanding car to command such a price. Plus all the sunuk costs in mods/running the car during that time.

It's different for me with a 32GTR having owned one for 6 years at ~20k, it's pretty much hit rock bottom and bounced back a little. As long as it still resembles a car itll be worth at least 20k.

my2c.

That's the issue with any car of course.

I see R34's having a better time holding some value than 33s, which will get sandwiched between 34s and 32s as 35s come down in price when the 36 arrives.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers)
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
    • OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
×
×
  • Create New...