Jump to content
SAU Community

R32 - Battery In The Boot? Poll

WantGTR

By WantGTR,
in Car Audio & Electrical

 Share

Boot mount battery?  

14 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

WantGTR Mentor

WantGTR

Posted
  • Author
Posted

I did mine on the weekend for weight saving/ transfer, bigger catch can and hard wiring fuel pump.

Very happy with the results.

interested in pics!

i have a few ideas about going to the boot but want to see what people are using as far as terminals in the engine bay/connectors as such.

WantGTR Mentor

WantGTR

Posted
  • Author
Posted

Still needs finishing off but you get the gist.

http://imgur.com/8urJCNn

http://imgur.com/lA0p072

http://imgur.com/62gasGd

thanks! thats nice.

im assuming yours is still a street car? reason i ask is because the battery isnt in a box. i do prefer the battery mount only as a box can make the install to bulky. If i decide to go put it in the boot i may need to get a different battery as i have a huge one at the moment.

i know exactly which distribution block you used also lol

Jordy32 Experienced

Jordy32

Posted
Posted

I have mine in the boot (R32 GTS-T)

I have a dry cell battery in a morosso sealed box in the boot and a jump start point (+) where the battery used to be simply for convenien and a kill switch in the cabin

I'll get some photos tonight if you'd like!

gtr jet Veteran

gtr jet

Posted
Posted

thanks! thats nice.

im assuming yours is still a street car? reason i ask is because the battery isnt in a box. i do prefer the battery mount only as a box can make the install to bulky. If i decide to go put it in the boot i may need to get a different battery as i have a huge one at the moment.

i know exactly which distribution block you used also lol

Yeah mate, still a street car. Battery doesn't need to be in a box if it's a dry cell. I had a 15KG+ standard battery in the engine bay and pissed it off for the little 7KG dry cell.

The distribution block was very handy. I picked up most of the stuff from Jaycar.

  • 3 weeks later...
Cev Community Regular

Cev

Posted
Posted

Still needs finishing off but you get the gist.

http://imgur.com/8urJCNn

http://imgur.com/lA0p072

http://imgur.com/62gasGd

Keen. Where did you source all your gear?

I'd be interested in a shopping list if you can provide one :P

I'm looking to prepare my HNR32 shell for 26/30 swap, currently RB20 undergoing a makeover.

gtr jet Veteran

gtr jet

Posted
Posted

@gtr jet .. Nvm, found it all. What did you use the relay for?

Also which bracket is pictured in your photo?

Hey mate, the relay is for the fuel pump as it is now hard wired to the battery.

The bracket holding the battery down is just one I whipped up with some steel bar I had laying around.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...