Jump to content
SAU Community

Recommended Posts

Front has Cusco Adjustable top arms, 4 different settings... it's currently set to max negitive which should be about -2.5 deg, can get -3 to -3.5 I think if you also get an accentric bolt / bushes up there.

Front has Cusco Adjustable top arms, 4 different settings... it's currently set to max negitive which should be about -2.5 deg, can get -3 to -3.5 I think if you also get an accentric bolt / bushes up there.

Flip the plate on the arm and you'll get a bit more.

Max the castor untill you hit the gaurd, then back it off.

+2mm total on the front toe

Neg 1.2 on the rear

-1 total on the rear toe

  • Like 2

Yep

Pretty sure you just rock up and call the guy and they'll unlock a garage. I'll try and sort it out beforehand though. If you PM me your phone number and bring some cash on the day I'll make sure to keep a space for you.

Probably also handy for any repairs that can be done with hand tools - couple of us will be bringing our tools.

Ok guys,

Who will be there on Sunday so I can make sure we bring enough steaks! Also SAU will have a garage for people to chill out in / get out of the weather.

Matt Lowth

Potato

Simone

13 Crag

Wog

Alex

Gav

Aaron

Birds +1

Darren

Borci88

Phantc_15

srs14t

Crzy32

Anyone Else?

post-723-0-06178600-1447326705_thumb.gif




  • Latest Posts

    • I refer you to this thread on PF, by someone who knows what he's doing. Paints a good picture of the humble AD09.
    • Ha, I've never pressed the X in all these years incase it removed the notification for all Admins
    • I don't know, I've never done it that way, but 1. While it is an interference engine, there is still clearance between the valves and the piston at all points in the regular timing cycle 2. There is not a lot of distance before you can't catch the top of the valve stem any more I don't know if 2 is greater or less than 1. But 3. If it doesn't work out you are f**ked, engine is coming out to disassemble so it is a big bet.
    • Semi slicks are horrible for road use, just use a high performance road tyre unless you really need the maximum grip. Noisy, unpredictable (amazing, until they are not), expensive due to very high wear and not good in cold and particular wet. And yes, it is a thing to store cars on stands instead of tyres if you know they are going to be parked up long term.....but who ever realises that a short park is going to stretch into years before it is out again!
    • I know in Australia you'll definitely get above 30c. Parked in the shade in Summer you'll be above that. 😛 But in cooler climates, you might get that warm driving on the highway for a bit, but you'd never get to full heat temp. I'll try and find some of my historical tyre temps between Aus summer and winter (be aware immin the warmer area of Aus too.)
×
×
  • Create New...