Jump to content
SAU Community

Recommended Posts

Hi guys, I’m looking for some advice.

I have a 1994 R32 GT-R V-Spec II and would like to upgrade my dumps and turbos (and hopefully gain a bit more power) but seek your advice on best brand/model combinations..........

I wanted a car that was visually as close to stock as possible (even sourced and fitted a new period correct Eurovox AM/FM radio) but returns the most amount of power without compromising driveability.

The current specs of my car are as follows:

• 3.25” HKS Performance Exhaust
• 3” High Flow Catalytic Converter
• Niztune
• Nismo MAFS
• Splitfire Coils
• HKS EVC 6 Boost Controller - Set at max (22 psi) and hidden behind the ashtray.
• Sard 720cc Injectors
• Walbro Fuel Pump (size not known)
• Excedy Heavy Duty Clutch Inc diaphragm, friction plate and throwout bearing. Flywheel machined to suite.

FWIW....... It also has Bilstein front and rear Strut/Shock set up with King Springs and Whiteline upgraded front and rear sway bars.

It was Dynoed at 285rwkw at Croydon Motorsports and 272rwkw at Unigroup Engineering, make of those figures as you will.

Same set up, similar conditions.

It has standard dump pipes and factory original ceramic turbos.

It’s obvious that the STD Turbos are running pretty much to capacity so I’m looking at upgrading both the dumps and Turbos.
I was thinking of TOMEI dumps, open to model/part number recommendations and a pair of Garrett GT2860R-7 Turbos. (R34 GT-R N1 Style).
The car feels like a factory STD car with a healthy amount of performance.

The car will only used for occasional spirited weekend drives.

What dump/turbos combination would you recommend other than what I've already suggested and is there anything else I should look at to enhance the performance without losing drivability.

I’m not keen on changing the cam so would adjustable cam gears serve any merit for more bottom end performance?

Should I change any of the parts already fitted?

I appreciate your input......

Cheers,

Bob.

post-78207-0-00448300-1444502133_thumb.jpg

post-78207-0-54447600-1444502152_thumb.jpg

post-78207-0-15656800-1444502171_thumb.jpg

post-78207-0-09126200-1444502197_thumb.jpg

post-78207-0-50576800-1444502214_thumb.jpg

post-78207-0-07821700-1444502244_thumb.jpg

post-78207-0-54525100-1444502261_thumb.jpg

post-78207-0-17788800-1444502278_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/460293-help-in-upgrading-dumps-and-turbos/
Share on other sites

My thoughts based on my cars previous setup.

  • Open style dumps (Tomei, Mines, R34 etc)
  • Matching front pipes, preferably equal length
  • Adjustable cam gears (I saw very good low/mid end gains getting this right)

-7s if you're happy with the setup you have but just want to push the a little bit harder.

-9s if you want to keep similar response to stock, but would like to seem more power (~50hp) over the -7s

On -5s it's very worthwhile opening up the exhaust manifolds while turbos are off.
I'd be interested if people think it's worthwhile on -7s/-9s also, or whether it is seen to negatively impact these smaller turbos?

  On 11/10/2015 at 4:53 AM, Hadouken said:

you like your motor?

turn the boost down on those turbos before they kamakazi themselves

Yep........ Thanks for the advice and hence why I made the original post.

I very rarely take it past 4000RPM so it hardly goes past half its maximum.

The front pipes are part of the HKS 3.25" system so I'm happy to stay with them.

How do these look as upgrades?

http://www.kudosmotorsports.com/catalog/tomei-cam-gear-set-intake-exhaust-tomei-152009-152010-nissan-skyline-r32-gtr-gts-gts25-gts4-gtst-r33-gtr-r34-gtr-p-854.html

http://www.kudosmotorsports.com/catalog/tomei-turbocharger-dump-pipe-set-68mm-275-tomei-expreme-421201-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-stagea-wgnc34-260rs-rb26dett-p-601.html

http://www.kudosmotorsports.com/catalog/garrett-garrett-gt2860r7-r34-turbocharger-set-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-rb26dett-p-307.html

Cheers,

Bob.

  On 11/10/2015 at 8:08 AM, Hadouken said:

Hpi dumps are way better.

But you would know that because all of this is extensively covered and a gazillion threads.

Yes of course........ Silly me!

http://www.kudosmotorsports.com/catalog/hpi-turbocharger-dump-pipe-kit-hpi-hp2tobnr32-nissan-skyline-r32-gtr-r33-gtr-r34-gtr-vspec-vspec-rb26dett-p-1211.html

For what you want, -7s or 9s and open dumps with cam gears and a tune will be perfect,

Cam gears are worth every cent (even with the factory cams)

My new exhaust is being fitted and the tune touched up soon which will basically make it what your car will be and you're welcome to take it for a drive to make sure it's what you want

Thanks Brett, I appreciate your reply and offer.

I know the Unigroup Dyno is the most modest of the higher profile tuners so if I can get to the magical 300rwkw on their dyno I'd be thrilled.

That requires a 10% increase primarily from the dumps.....

Not sure if that is realistic but my primary objective is to have a safe tune and no blow the whole thing up.

Cheers and thanks again......

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Block bump. $400. As above cyl 6 needs bore or sleeve.
    • I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...