Jump to content
SAU Community

Recommended Posts

ok so i think i found a much better place for injector cleaning. just had a quick look. anyone been or heard of AZNEW ? http://www.aznew.com.au/

Sorry for the random posts but I am just scrolling through your thread now. As well as cleaning your injectors you should get a report saying how much they pump - they need to be as close as possible (within 10% at least) - and also that will confirm what injectors you have.

Same colour has the 700cc injectors though that's why I thought maybe it's them.

Anyways u took a pic of the vipec ecu and honestly it looks good to me but I don't know shit about electronics. I sent pics the vipec dude. Waiting to see his responsepost-14097-0-32795600-1446165060_thumb.jpg

Same colour has the 700cc injectors though that's why I thought maybe it's them.

Anyways u took a pic of the vipec ecu and honestly it looks good to me but I don't know shit about electronics. I sent pics the vipec dude. Waiting to see his responseattachicon.gif20151030_112315.jpg

Testing when you get around to it will tell you exactly what injectors you have. They may have been modified in some way.

As per my PM i suggest you deal direct with the factory with the ecu. Their knowledge and expertise is second to none. I don't know who you are dealing with now but they are probably incentivised to sell you a new ecu rather than fix yours.

Went to start car again and flooded it. Made me realise how unready I am for this car. I'm thinking I should sell it or part it out now. I don't have a working car atm and no job and every time I go to an interview they ask if I have a car....never get called back lol stressing me out.

How can you think I could get selling as or parting it out. I rather just sell it as it is but I don't know if anyone would I'm the state it's in. I think I should get something simpler. Like an r33 gtst that's running. I had mates that had them and they never had serious problems. Hoping to get a somewhat decent price and I'll have to borrow the rest to get a working car. Feel like I out a pet or something I so badly wanted to get this car going

Offer it up here for swaps for something , by the looks of it even in its current form you should be able to swap it for something decent. After all it's a gtr, with a decent amount of mods, take some good quality pictures, list of parts you know etc etc and someone can come trailer it away..

No offense but with your lack of knowledge parting it would be just as much a pain in the ass than fixing it and you'll be left with half a car and a lot of crap people don't want

yeah thats why i wasnt keen on parting it out lol.

its in rough shape.since its a bee-r r32.4 wide body kit thats made of fibreglass it has stress cracks in quite a few spots. easy for someone who knows how to fibre glass though i guess.

not at home till monday but i think i have pics on my phone that i'll upload.

interior is in pretty good condition though.outside needs a decent amount of work. as for engine, i recon head gasket and/or new valves or valves cleaned and it will be good to go from what i've been reading.i would love to swap it for an r33 gts-t or something similar. was the car i was going to buy in the first place and they're nice to drive.

i'll post some pics in here if i can find some and see what peoples responses are

i'll post a little preview of that i'll put on the for sale section since and someone can critique it lol i've never sold a car before.

Up for sale is my r32 gtr ( r32,4 gtr ) needs some love and attention:

the fibre glass wide body kit has stress cracks in some spots. will be sold with space saver wheels. will need to be towed.

car is also runing stock ecu ( it will start,but its rough due to not liking having no afm and running 800cc injectors) for the time being while the vipec ecu gets checked over as car wouldnt start with it. possible damage to the board from hooking up battery wrong way,

engine possibly needs a new head gasket and/or valves cleaned for sitting for a long time. has low compression on 2 of the cylinders due most likely to those reasons.

as for the good bits, Interior is in good condition,shouldn't take much to get it going.

Would suit someone who knows what they're doing or has a budget to get it running and looking good.

will look awesome with some TLC

Also just put in new NGK BCPR7ES spark plugs, new Optima Yellow D51R-T1 battery and a new POD filter.

probably alot of other mods i don't know about

would make an awesome track/drift car

Engine:

RB26
T04R Single Turbo kit
Stainless Manifold,
60mm Tial Wastegate
Tomei 260 Poncams
Tomei adjustable cam gears
Sard 800cc Injectors
Sard 280ltr Fuel Pump.
Gates timing belt.
R33 oil pump
Braided fuel lines.
Management:

Vipec ECU

as well as stock R32 ECU
Suspension:
Tein Mono-flex fully adjustable coilovers
Cusco rear strut braces.
Driveline:
Stock 5 speed,
Exedy triple plate clutch
Nismo short shifter.
Brakes:
R33 GTR Brembos calipers all round.
DBA slotted rotors.
R33 GTR ABS unit.
Wheels:
space saver wheels (lol)
Interior:
Recaro SR reclinable drivers seat.
Jaycar speakers all round
Nismo 260km Cluster
2/4wd Switch.
Turbo timer
Viper Alarm
EXHAUST:
4" Veilside exhaust from Turbo back. With 2 centre mufflers (quiet)
Exterior:
Customised Full genuine Bee-R (B324r) Widebodykit with R34 gtr front end.
R34 Xenon headlights
Shaved bootlid.
Sparco alloy fuel cap.

Edited by deprived777

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...