Jump to content
SAU Community

Recommended Posts

3 minutes ago, Lithium said:

Most Thursday nights I have a low key group of car mates who meet up and yarn in Lower Hutt, there are 2/3 Skylines as regulars but its really just across the board (@Looney_Head included) - welcome to pop down sometime if you want.  PM me if you are interested and I can let you know details, watching the weather for tomorrow night as it looks borderline atm haha

Yeah im definitely keen, if the weathers nice and all for sure. I've lost track of where everyone goes, last time I went out would probably have been Hard Park this year.

  • Like 1
  • 2 years later...
15 hours ago, K-LESS said:

Small Updates, Idle motor broke so have converted to drive by wire.

 

Haha that's a pretty sweet way of fixing that issue, cool to see it's still trucking along! I thought I may have seen you around recently.

Thursday night catch ups are still plodding along btw, if you're ever around 

  • Like 1
3 hours ago, Watermouse said:

Nice switch over mate,

Do you mind telling us what dbw parts or kit u got please?

cheers, Ian

Hey Watermouse,

So didn't use a kit of any kind, but we used a bosch accelerator pedal and a 74mm bosch electronic throttle body. A bracket had to be made up to fit the pedal along with an adaptor so the throttle body could be bolted to the intake manifold / plenum.

Edited by K-LESS
  • Like 1
3 hours ago, Lithium said:

Haha that's a pretty sweet way of fixing that issue, cool to see it's still trucking along! I thought I may have seen you around recently.

Thursday night catch ups are still plodding along btw, if you're ever around 

Hey Lithium,

Good to hear from you, hope all is well, and that's good to know, I'll try coming along to catch for one in the near future. And yeah, apparently going down this route unlocks a whole lot of other possibilities so I thought it might be the go.

1 hour ago, PranK said:

That looks very cool.

Thanks PranK, I'm honestly amazed at how one much different the car feels and drives due to the modern technology upgrade.

On 14/02/2024 at 8:01 PM, K-LESS said:

converted to drive by wire.

Wish you did it sooner aye? How good is the idle control now? Not to mention the superior throttle control.

  • Like 1
7 hours ago, Dose Pipe Sutututu said:

Wish you did it sooner aye? How good is the idle control now? Not to mention the superior throttle control.

Hey Dose Pipe Sutututu,

I can say yup I wish I had too, I probably would have done it when I first started putting the car back together had I known such options were possible or available. But yeah the car just feels better all around and drives so much better now too. Sooo good!

AC idle? no worries
AC idle & big brap cams? no worries

no hunting or stalling at the lights, etc. cold starts, warm starts, etc. so good!

I don't get the whole dBw iS sLOw brigade, they clearly don't know anything!

  • Like 1

I wonder if it is because dbw lets car manufacturers do all kinds of shenanigans with the throttle input. Which then makes it feel like a computer is in control and not the driver. I think at least on economy shitboxes throttle inputs are modulated for maximum fuel efficiency. Loses all pedal feel and feedback.

I presume neither of you have any of that nonsense on the Skyline :)

  • Like 1
30 minutes ago, soviet_merlin said:

I wonder if it is because dbw lets car manufacturers do all kinds of shenanigans with the throttle input. Which then makes it feel like a computer is in control and not the driver. I think at least on economy shitboxes throttle inputs are modulated for maximum fuel efficiency. Loses all pedal feel and feedback.

I presume neither of you have any of that nonsense on the Skyline :)

Yeah I'd agree with this. I have a throttle controller in the 335 and I've temporarily put it in the X5 and 330i and its pretty interesting how it can change things. That said, the controller doesn't remove BMW's "Driver adaptations" which is their way of manipulating the throttle based on what they "think" you want. 

I wonder if there is a DBW -> Cable conversion kit. 🤔

EDIT: I made the adaptations sound shit. They're absolutely not and BMW does a good job here, its just sometimes I'd like a bit more "direct" control. 

  • Like 1
1 hour ago, Dose Pipe Sutututu said:

AC idle? no worries
AC idle & big brap cams? no worries

no hunting or stalling at the lights, etc. cold starts, warm starts, etc. so good!

I don't get the whole dBw iS sLOw brigade, they clearly don't know anything!

Honestly, it's so much better like I have no issues with any of the above. Dare I say it I did go to a smaller throttle body as well, so weather its one or the other or a combination of both I couldn't say. But I can say I think it definitely feels much better and drives much better, but yeah, I'd say calibration / setting up and tuning it properly plays a big part too. The guys who done this for me have done a great job. I can honestly say at this point it is much better that it previously was with the 80mm throttle body and cable throttle. As for people saying its slow, I'm guessing it's the kind of people who think they can do things better and faster than a computer maybe lol.

52 minutes ago, soviet_merlin said:

I presume neither of you have any of that nonsense on the Skyline

I still apply a slight damper on it, so it's not so sensitive, which I assume most don't.

 

  • Like 2
53 minutes ago, soviet_merlin said:

I wonder if it is because dbw lets car manufacturers do all kinds of shenanigans with the throttle input. Which then makes it feel like a computer is in control and not the driver. I think at least on economy shitboxes throttle inputs are modulated for maximum fuel efficiency. Loses all pedal feel and feedback.

I presume neither of you have any of that nonsense on the Skyline :)

Hey soviet_merlin,

Yeah I can imagine that stock cars that come with dbw from the factory are probably much different. I myself have probably driven rental cars and such with that technology. However, as you say the computers are setup much differently, I imagine. Dare I say the guys who set mine up for me spent some time doing some calibration and tuning etc. But they definetly have done a good job and I can honestly say that my DBW setup feels much better than the previous 80mm Throttle Body Cable setup.

  • Like 1
29 minutes ago, PranK said:

Yeah I'd agree with this. I have a throttle controller in the 335 and I've temporarily put it in the X5 and 330i and its pretty interesting how it can change things. That said, the controller doesn't remove BMW's "Driver adaptations" which is their way of manipulating the throttle based on what they "think" you want. 

I wonder if there is a DBW -> Cable conversion kit. 🤔

EDIT: I made the adaptations sound shit. They're absolutely not and BMW does a good job here, its just sometimes I'd like a bit more "direct" control. 

Interesting, so you have a separate throttle controller as opposed to making changes on the ECU? I'm guessing BMW don't let you tinker with this stuff?

29 minutes ago, K-LESS said:

Interesting, so you have a separate throttle controller as opposed to making changes on the ECU? I'm guessing BMW don't let you tinker with this stuff?

'Controller' is probably a little too liberal. It alters your inputs to fool the throttle. It does enough for me, but yeah there are loads of aftermarket electronics out there. I have an MHD tune at the moment and it has some throttle stuff in there too and I'll investigate it eventually.

  • Like 1
Just now, PranK said:

'Controller' is probably a little too liberal. It alters your inputs to fool the throttle. It does enough for me, but yeah there are loads of aftermarket electronics out there. I have an MHD tune at the moment and it has some throttle stuff in there too and I'll investigate it eventually.

Please feel free to correct me if I'm wrong but it's almost like a piggy back or a Apexi SAFC but it's for your Throttle and sits between that and the ECU?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...