Jump to content
SAU Community

Recommended Posts

Hi guys, who in Sydney does the conversion from Jap to English for the screen display in dash? I read a huge thread and it seemed like Jetwreck does it, I've PM'd him but haven't got a reply (maybe he's busy IDK). Is there anyone else that people know of that do these regularly?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/461553-jap-to-english-conversion/
Share on other sites

Can any authority on this subject create a DIY thread with all info? Would be awesome if we could just direct people to a single thread with an easy-to-read list of contacts and Q&A's.

Pretty please?

PM either Andy (Andy65b) or Craig (Jetwreck).

I don't know if they are still doing them, but may be able to point you in the right direction.

Original thread was in the V35 section: http://www.sau.com.au/forums/topic/194126-software/page-2

  • Like 1

I can pretty much decipher most of it between pictures and a translate app it's just annoying and I like stuff to work properly lol.

On a side note it's got the standard CD player under the standard gauges in the centre, it won't tune to above 90, will a new head deck fix this or is the aerial/antenna an issue too?

I can pretty much decipher most of it between pictures and a translate app it's just annoying and I like stuff to work properly lol.

On a side note it's got the standard CD player under the standard gauges in the centre, it won't tune to above 90, will a new head deck fix this or is the aerial/antenna an issue too?

for FM, i think you just need a FM extender

http://www.ebay.com.au/itm/Nissan-Skyline-V35-Stagea-M35-Elgrand-E51-FM-Band-Expander-18-MHz-FM-Converter-/252197779040?hash=item3ab828b660:g:2Y8AAOSwBLlVHQKm

post-137368-0-19841800-1449637466_thumb.jpg

also if you want a aftermarket CD player, you need to make sure you don't have BOSE system dash, otherwise, you need to trim it or change to like this:

post-137368-0-17431100-1449637605_thumb.jpg

You like it now.... give it a year and when you have a double din you wont ever use it.... noobies

a couple of days in my case drove from launie to hobart keeping eye on economy. Then realised it likes fuel so just look at fuel gauge now, however my son does like it

You like it now.... give it a year and when you have a double din you wont ever use it.... noobies

Haha probably. But at the moment I'd like to keep the stock gauges in the dash so no room for double din

Jetwreck no longer does conversions, and from what he told me; whoever does them now charges an arm & a leg.

It's really nothing but novelty value; you won't even look at it in 6 months.

Fwiw, band expanders are a pita; the numbers on the screen don't reflect the actual station, and it drove me mad in about a week. Pull out the Jap head unit and replace it with something that does the job properly with stations you can actually tune.

Fwiw, band expanders are a pita; the numbers on the screen don't reflect the actual station, and it drove me mad in about a week. Pull out the Jap head unit and replace it with something that does the job properly with stations you can actually tune.

Ahhh yes thats the exact answer I was after! So the issue is with the head deck not the antenna/aerial. Cool

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...