Jump to content
SAU Community

Recommended Posts

Circuit Name: Wakefield Park

Lap time: 1:10.8

natsoft: Qstarz

Car model: American Legend

Modifications; stock

Engine: 1200cc Yamaha FJ1200

Power: ~100bhp

Suspension: Afco coilovers

Tyres: Hoosier Slicks

Brakes: F= VL Turbo R= VZ Commodore

Other: Winters Quickchange Locker

Car weight: 650kg with driver.

SAU Nickname: ssxRicho

Car Make and Model: '96 R33 GTST

Circuit Name: Calder Park

Lap time: 1:06.33

Modifications

Engine: standard, intercooler, pod, hyper-gear 21U highflow turbo, stock fpr + injectors + afm, gtr pump, pfc, greddy ebc

Power: 210rwkw

Suspension: greddy type s, swaybars, hicas lock, cusco camber arms + upper bushes, cusco solid subframe collars

Tyres: AD08 255/40

Brakes: ksport 330mm front with blue stuff, stocker rears with yellow stuff

Body weight: stock

Aero: BEE*R wing

http://www.natsoft.com.au/cgi-bin/results.cgi?24/03/2012.CPR.S25.Y

SAU Nickname: ssxRicho

Car Make and Model: '96 R33 GTST

Circuit Name: Sandown

Lap time: 1:24.20

Modifications

Engine: standard, intercooler, pod, hyper-gear 21U highflow turbo, stock fpr + injectors + afm, gtr pump, pfc, greddy ebc

Power: 210rwkw

Suspension: greddy type s, swaybars, hicas lock, cusco camber arms + upper bushes, cusco solid subframe collars

Tyres: AD08 255/40

Brakes: ksport 330mm front with blue stuff, stocker rears with yellow stuff

Body weight: stock

Aero: GTR Wing

http://www.natsoft.com.au/cgi-bin/results.cgi?16/10/2011.SAND.P2

SAU Nickname: nfi

Car Make and Model: 2001 Nissan 200sx

Circuit Name: Wakefield Park

Lap time: 1:04.07

Modifications

Engine: Turbo, ex gate, injectors, cams, PFC

Power: 248.8rwkw (just touch up tuned on Saturday with R comps on)

Suspension: Bilstein coilovers, whiteline swaybars, cusco upper arms in the rear and front castor rods

Tyres: Hankook Z221's

Brakes: R33 GTR Brembo's

Body weight: 1150kg

Natsoft: http://www.natsoft.com.au/cgi-bin/results.cgi?25/03/2012.WAKE.S2.Y

In car footage:

Edited by nfi

very sloppy lap for a 1.04 well done!

I know! It was the first session of the day and unfortunately I only got two timed sessions before I broke the master cylinder. I was having issues with snap oversteer on corner exit. We later improved with swaybar and damping but a better time wasn't to be with mechanical issues setting in.

first time i've posted in here, first real track day i suppose...

SAU Nickname: R32gts-t

Car Make and Model: '89 s13 silvia

Circuit Name: Calder Park march 24th

Lap time: 1:07.50

Modifications

Engine: standard, intercooler, factory airbox, hks 2540 turbo, sard 550cc injectors, z32 afm, bosch pump, pfc, avcr ebc, tomei poncams

Power: 224rwkw

Suspension: tein jdm superstreet, gtr swaybar rear, whiteline front, cusco rear camber arms + traction arms, kazama castor rods, ikeya formula tie rods and ends, solid subframe collars, ATS 2 way lsd.

Tyres: re55s 235/255

Brakes: r32gtr front and rear, rb74 pads, rda & dab slotted rotors

Body weight: stock

Aero: no name alloy rear wing

http://www.natsoft.com.au/cgi-bin/results.cgi?24/03/2012.CPR.S25.Y

  • 2 weeks later...

Sau name: SkylinerGTR

Car: r32 GTR

Circuit: Mallala, SA

Time: 1.22.2

Engine: stock, 3" exhaust, nistune ecu, 15 psi boost.

Suspension: king springs bilstein shocks otherwise stock.

Tyres: 255/40/17 toyo r1r

Brakes: stock

36 degree heat plenty left in it only did about 10 hard laps and only taking it just over 7000 rpm

SAU Nickname: Kylieyeah

Car Make and Model: 1999 Honda S2000

Circuit Name: Wakefield Park

Lap time: 1:12.6

Modifications

Engine: Stock w/ intake, headers, exhaust

Power: About 140kw atw (stock)

Suspension: Bilstein PSS9

Tyres: Dunlop Direzza Z1 Star Specs street tyres

Brakes: Stock

Body weight: 1250kg

Could anyone please let me know the average or "fast" time for a stock GTR R34 around Wakefield Park please?

  • 1 month later...

New time for Winton. Very happy with it.

E85 made a massive different. So much mid range power increase! Pulled like a train!

Now running 295 Advans. These ones were 2nd hand and only cost me $50 each!

Date: 11/06/2012

Car Make and Model: R32 GTSt

Circuit Name: Winton

Lap time: 1:31.29

Timing method: Natsoft

http://www.natsoft.c.../06/2012.WIN.S1

Modifications

Engine: RB25 with PowerFC, Garret GTX3076 turbo, lots more stuff.

Power: 325rwkw on E85

Suspension: Tein RS's, R33 LCA's, Adj susp arms, strut braces and whiteline swaybars

Tyres: ADVAN AO50 295/30/18 softs

Brakes: 256mm G4's front, rear standard

Body weight: 1280kg's without driver.

  • Like 1
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...