Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...

Guys,

What are my chances of getting a pair or a drivers side rear quarter panel for a HR/DR30 2 door??

Anyone know if nissan can still get them? or aftermarket possibly?

Maybe a whole bare rear cut DR30?

Any help with straightening my lovely HR30 would be great...

Cheers,

:(

  • 3 weeks later...
Guys,

What are my chances of getting a pair or a drivers side rear quarter panel for a HR/DR30 2 door??

Anyone know if nissan can still get them? or aftermarket possibly?

Maybe a whole bare rear cut DR30?

Any help with straightening my lovely HR30 would be great...

Cheers,

:P

The part numbers you require are as follows:

Right Hand 78112-21500 Fender

Left Hand 78113-21500 Fender

But good luck, as the coupe never came here, these would have to be ordered ex Japan unless you can convince an parts importer to bring in the rear quarters second hand, but your going to need the rear panel 79110-21500 as well.

Better off trying to convince them to bring you back a rear half cut.

NOW! what about the bits you bought from me, or do i tell everyone on here what your not doing?

Anyone know where/if you can get new seals/rubbers for the windows????

I guess they would be the same as my PNV coupe rubbers.

If they are I'll go ask Peter Jackson's Old Auto Rubber, next week and see what I can find.

Cheers,

D

Cheers Dennis, the one's im really chasing atm are the one's that seal the main door window to the back window, mine are stuffed :rolleyes:

Just chuck us a PM if and when you find anything out!! Cheers mate :cheers:

This might be a dumb question, but are you talking the vertical one attached to the rear glass, or the rubbers aroind the body?

D

Yup that be the one's im after at this stage!!! B)

  • 4 weeks later...

Hey guys Im wrecking my mr30 sedan,its got a fivespeed im told was close ratio 240z

Must sell Everything bfore 2nd of april as Im moving back to sydney .

Link to it here. http://www.skylinesaustralia.com/forums/in...howtopic=108474

SOLD everything except the number plates :D

Edited by s12rsx
  • 6 months later...
  • 3 months later...
i know how hard it is to find something you need so just throught i'd put up the names of places that have helped with the harder to find bits for the older cars.

www.jaustech.com.au (pricee but at least they have it)

www.japparts.com.au (QLD)

www.option1garage.com.au (QLD)

www.importbitz.com.au

www.slidewizeimports.com can import things for you from japan(big thumbs up)

SSS Automotive at Girraween 02 9896 6111

Just Jap at Kirrawee (they race a DR30)

Nispares/Datparts (0397298497)

Z-16 autoparts - primarily Z-car spares, but might have parts for other classics

- Harvey Rd, Kings Park, NSW, 2148 - (02) 9831 4734

Rare spares - lots of popular classic restoration parts

- www.rarespares.net.au (online ordering)

- 388 Gilbert Road, Preston VIC 3072 - (02)9471 0733

- 213 Parramatta Road, North Strathfield NSW 2140 - (02)9746 1188

Castlemaine Rod Shop - Fabrication of mounts, conversion kits etc.

- www.rodshop.com.au (ordering through email, do COD)

- Pyrenees Highway, Chewton, VIC, 3451 - (03) 5472 2853

Mad Dat Motorsports - some conversion stuff

- www.maddat.com.au (ordering through email)

- Unit 1 / 57 Boothby Street, Panorama S.A. 5041 - (08) 8374 4611

Datsport

1 Donegal Road Lonsdale, Adelaide SA

81862100

www.Datsport.com

"MARINE CABLES" (will make brand new handbrake cables for less than 2nd hand ones)

07 55376099

IF YOU GET NO LUCK HERE THEN TRY THE JAPAN SECTION FOR THE LIST OF SITES IN JAPAN?

its a small list but they have been able to help me so if you know of places that may be able to help someone maybe leave some info.

:rant:

  • 2 weeks later...

IPswich spare parts, blacksion warrego highway in BRIS have 2 r30 liftbacks, one is blue and silver manual with engine and TI wheels, still relatively complete (still has wheels on it) but if you wanted it whole youd have to get there quickly, other is white auto with a few bits missing, sitting among all the r31s and 910s

IPswich spare parts, blacksion warrego highway in BRIS have 2 r30 liftbacks, one is blue and silver manual with engine and TI wheels, still relatively complete (still has wheels on it) but if you wanted it whole youd have to get there quickly, other is white auto with a few bits missing, sitting among all the r31s and 910s

can you do me a favour?

i called them and they said they didnt have any, ( i think the guy couldnt be f@#ed he was an absoluts basterd)

i need the front bumper, and the reinforcement behind the bumper,

its for an old dude i know, and he will pay good $$

can you ask how much when your there next??

cheers,

Andrew

  • 2 months later...
  • 1 month later...
hi everyone. does anyone know where abouts i could pick up a front lower chin spoiler for a hgc211 skline. i think hgc210 chin spoilers are the same??

If Anyone see's or hears of these please let me know also :D

C-RED sent me to GO-TECH at 233 collier rd Bayswater, Owen used to race a 720 with a L20t at lanclin(i think) now the engine is in a 260z, knows about the oldr engines as well as newer ones. have yet to get him to up the ante on my HR30 L20T but at least he knows how! he's in same bdlg as AGI parts so he just goes next door for any bits (very handy)!! happy hunting! :Pimp:

Sorry, you have an HR30 with an L20ET and live down this way>?

are you going on some cruise this Friday in Melbourne?

- Nissco (1600 workshop)

- 2 halbert Road Bayswater North.

www.nissco.com.au

these guys have been very helpful and know their stuff when it comes to Nissans... One of the young guys out there used to have a DR30 but sold it just before i started taking my car there. Well priced, won't rip you off, and do quality work. Two thumbs up for these guys.. They have a shit load of 1600's out there too

  • 2 months later...
Sorry, you have an HR30 with an L20ET and live down this way>?

are you going on some cruise this Friday in Melbourne?

woops, bit late!! this was for perth peeps..but he has now closed up shop...so no-one to do any r30's here. ;):worship:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...