Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 months later...

Guys,

What are my chances of getting a pair or a drivers side rear quarter panel for a HR/DR30 2 door??

Anyone know if nissan can still get them? or aftermarket possibly?

Maybe a whole bare rear cut DR30?

Any help with straightening my lovely HR30 would be great...

Cheers,

:(

  • 3 weeks later...
Guys,

What are my chances of getting a pair or a drivers side rear quarter panel for a HR/DR30 2 door??

Anyone know if nissan can still get them? or aftermarket possibly?

Maybe a whole bare rear cut DR30?

Any help with straightening my lovely HR30 would be great...

Cheers,

:P

The part numbers you require are as follows:

Right Hand 78112-21500 Fender

Left Hand 78113-21500 Fender

But good luck, as the coupe never came here, these would have to be ordered ex Japan unless you can convince an parts importer to bring in the rear quarters second hand, but your going to need the rear panel 79110-21500 as well.

Better off trying to convince them to bring you back a rear half cut.

NOW! what about the bits you bought from me, or do i tell everyone on here what your not doing?

Anyone know where/if you can get new seals/rubbers for the windows????

I guess they would be the same as my PNV coupe rubbers.

If they are I'll go ask Peter Jackson's Old Auto Rubber, next week and see what I can find.

Cheers,

D

Cheers Dennis, the one's im really chasing atm are the one's that seal the main door window to the back window, mine are stuffed :rolleyes:

Just chuck us a PM if and when you find anything out!! Cheers mate :cheers:

This might be a dumb question, but are you talking the vertical one attached to the rear glass, or the rubbers aroind the body?

D

Yup that be the one's im after at this stage!!! B)

  • 4 weeks later...

Hey guys Im wrecking my mr30 sedan,its got a fivespeed im told was close ratio 240z

Must sell Everything bfore 2nd of april as Im moving back to sydney .

Link to it here. http://www.skylinesaustralia.com/forums/in...howtopic=108474

SOLD everything except the number plates :D

Edited by s12rsx
  • 6 months later...
  • 3 months later...
i know how hard it is to find something you need so just throught i'd put up the names of places that have helped with the harder to find bits for the older cars.

www.jaustech.com.au (pricee but at least they have it)

www.japparts.com.au (QLD)

www.option1garage.com.au (QLD)

www.importbitz.com.au

www.slidewizeimports.com can import things for you from japan(big thumbs up)

SSS Automotive at Girraween 02 9896 6111

Just Jap at Kirrawee (they race a DR30)

Nispares/Datparts (0397298497)

Z-16 autoparts - primarily Z-car spares, but might have parts for other classics

- Harvey Rd, Kings Park, NSW, 2148 - (02) 9831 4734

Rare spares - lots of popular classic restoration parts

- www.rarespares.net.au (online ordering)

- 388 Gilbert Road, Preston VIC 3072 - (02)9471 0733

- 213 Parramatta Road, North Strathfield NSW 2140 - (02)9746 1188

Castlemaine Rod Shop - Fabrication of mounts, conversion kits etc.

- www.rodshop.com.au (ordering through email, do COD)

- Pyrenees Highway, Chewton, VIC, 3451 - (03) 5472 2853

Mad Dat Motorsports - some conversion stuff

- www.maddat.com.au (ordering through email)

- Unit 1 / 57 Boothby Street, Panorama S.A. 5041 - (08) 8374 4611

Datsport

1 Donegal Road Lonsdale, Adelaide SA

81862100

www.Datsport.com

"MARINE CABLES" (will make brand new handbrake cables for less than 2nd hand ones)

07 55376099

IF YOU GET NO LUCK HERE THEN TRY THE JAPAN SECTION FOR THE LIST OF SITES IN JAPAN?

its a small list but they have been able to help me so if you know of places that may be able to help someone maybe leave some info.

:rant:

  • 2 weeks later...

IPswich spare parts, blacksion warrego highway in BRIS have 2 r30 liftbacks, one is blue and silver manual with engine and TI wheels, still relatively complete (still has wheels on it) but if you wanted it whole youd have to get there quickly, other is white auto with a few bits missing, sitting among all the r31s and 910s

IPswich spare parts, blacksion warrego highway in BRIS have 2 r30 liftbacks, one is blue and silver manual with engine and TI wheels, still relatively complete (still has wheels on it) but if you wanted it whole youd have to get there quickly, other is white auto with a few bits missing, sitting among all the r31s and 910s

can you do me a favour?

i called them and they said they didnt have any, ( i think the guy couldnt be f@#ed he was an absoluts basterd)

i need the front bumper, and the reinforcement behind the bumper,

its for an old dude i know, and he will pay good $$

can you ask how much when your there next??

cheers,

Andrew

  • 2 months later...
  • 1 month later...
hi everyone. does anyone know where abouts i could pick up a front lower chin spoiler for a hgc211 skline. i think hgc210 chin spoilers are the same??

If Anyone see's or hears of these please let me know also :D

C-RED sent me to GO-TECH at 233 collier rd Bayswater, Owen used to race a 720 with a L20t at lanclin(i think) now the engine is in a 260z, knows about the oldr engines as well as newer ones. have yet to get him to up the ante on my HR30 L20T but at least he knows how! he's in same bdlg as AGI parts so he just goes next door for any bits (very handy)!! happy hunting! :Pimp:

Sorry, you have an HR30 with an L20ET and live down this way>?

are you going on some cruise this Friday in Melbourne?

- Nissco (1600 workshop)

- 2 halbert Road Bayswater North.

www.nissco.com.au

these guys have been very helpful and know their stuff when it comes to Nissans... One of the young guys out there used to have a DR30 but sold it just before i started taking my car there. Well priced, won't rip you off, and do quality work. Two thumbs up for these guys.. They have a shit load of 1600's out there too

  • 2 months later...
Sorry, you have an HR30 with an L20ET and live down this way>?

are you going on some cruise this Friday in Melbourne?

woops, bit late!! this was for perth peeps..but he has now closed up shop...so no-one to do any r30's here. ;):worship:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...