Jump to content
SAU Community

Recommended Posts

Located VIC 3978.
$9500. Price negotiable.
Selling due to need for 4x4 for work related reasons and to be completely honest, all the car needs is a financially stable owner. Due to a string of bad luck I've been unable to maintain employment for more than ~ 4 months at a time since purchasing the vehicle.
More pics @ instagram.com/cevlol
1993 Series 2 GTS4 sedan, white.

Engine:
152xxx K's (speedo swapped out, original one f**ked).
Fairly stock RB20DET
Turbosmart boost controller.
Remapped stock ECU.
42mm Alloy Radiator.
Custom FMIC w/ Ford core, shorter piping, more spool w/ brand new Proflow joiners + brand new hose clamps. No BOV, can plumb one in with silicone T piece for RWC.
New water pump less than 7k's old.
Full 3" turbo back w/ 3" dump/front pipe, stainless steel exhaust w/ high-flow cat & rear oval muffler. Note is 1hunnid.
Brand new genuine Nissan oil filter, less than 1000k's ago.
Brand new Motul Chrono Ether 300V 10W40 motor oil, doesn't need to be replaced for 9,000k's.
Brand new BCPR6ES plugs, less than 1000k's ago.

Interior:
Brand new R34 V-Spec Aluminium Pedal set.
Brand new Superior Auto Creative Carbon shift & handbrake boots.
Brand new Nissan shift knob.
Factory Series 2 GTST/GTS4 seats in very good condition.
Factory GTST/GTS4 steering wheel.
Exterior:
Brand new R32 GTR N1 front bar w/ eBay FRP vents.
Brand new R32 GTR N1 front reo.
Brand new Bosch Aerotwin Flat Wiper Blades.
VGC genuine R32 GTR front lip, could use respray but otherwise perfect cond.
Average condition R32 GTR wing FRP, minor hole one side.

Driveline:

R32 GTR rear shocks.

R32 GTS4 factory shocks.

HICAS lock bar / eliminator kit.
NISMO strut brace.
Brand new Exedy HD Organic clutch, freshly machined stock flywheel, less than 1000k's old. Penrite full synth in box atm.
ATF in transfer case/ATTESSA.
Custom 4WD/RWD toggle switch for sliding fun, don't use it often to be honest. Car stays in 4WD most of time.
Brand new Nismo R32 GTR slave cylinder.
Brand new HFM R32 master cylinder.
40% RWC tyres on R33 stockies.

Misc:
$1000 alarm system. Remote central locking, immobilizer + alarm.
Receipts from myself + last two owners.
High level brake light fitted to clear RWC fault as GTR wing is aftermarket.
Headlight loom completely rewired, no f**k arounds. H1/H3 combo w/ T10 parkers.
$3000 worth of sound gear, including Dynamat throughout. Can remove/include for adaptive pricing.
Bad:
Needs respray imho. White is 326 Crystal White but rough on quarter panels (in touch up paint atm, still very nice looking). Bonnet clear is well, peeling.
2nd gear very minor crunch. Could benefit from Redline treatment.
Input shaft bearing noise when clutch not pressed, goes away after 5 min drive. Very common issue that does not affect performance.
More pics @ instagram.com/cevlol

Reply here and/or email: [email protected]
Mobile outta order atm, changing carrier.
No swaps, unless you have a dope D22 Nav w/ 150k's or less (friend's selling me his for $9k).
YnhMwUf.jpg
P4V1uXN.jpg
Edited by Cev
  • Like 1

Price drop $7,500! 100% my loss ... brand new clutch, 300V & most of interior :)
I start my new job as a residential builder on 15th! Need this gone so I can pick up my Nav aka. work ute!

Cheers,
Cev

Bump, comp test done today. 150 across all 6 cyl ~ 5-8%

Call 0421 559 655 to express interest.

Bump n' stuff.

Still available, $6,500.

Will only need passenger side CV boot clamp for RWC.

Call 0421 559 655 ~

Cheers,

Joe

Edited by Cev

Bump.

$6,000 this week, without sound system.

Replaced broken coilpack clip with brand new replacement.

Will need passenger side CV boot clamp for RWC & potentially BOV.

Call 0421 559 655 ~

Bump.

Still up for grabs, $6,000 cash.

Car needs following for Roadworthy Certificate;

- front passenger CV boot clamp/grease, CV boot is fine, no tears -- $30

- BoV plumbed into current FMIC piping using Silicone T piece -- $80

- *potentially* may need stock intercooler if RWC inspector fails current custom setup -- $100 max (I can lend you a stock intercooler for RWC).

Call 0421 559 655 !!
Need this gone THIS WEEK so I can grab a Navara I've been after for work!!

  • 4 weeks later...

$4500 and ill pickup wednesday

No longer for sale, unless you're willing to pay $11k with Reg/RWC, gearbox reco'd, and R33 GTR wheels.

ie it's now my daily because low ballers and down syndrome's made me keep it!

  • Like 1
  • 4 weeks later...

Bump, back up for sale. $7000 ono.

-Club Reg-able in 2018. Will still be clean asf, rustless shell if you maintain it.

-HKS return flow intercooler added to car, custom FMIC setup removed. A/C can be refitted. (photo below is the HKS FMIC, NOT my car in photo).

-Redline Shockproof Lightweight gear oil has been added to remove second gear slight crunch, worked flawlessly.

-Brand new Osram Nightbreaker Ulimited H1/H4 low/hi beam added w/ Phillips 4300k parkers.

7Gbr91m.jpg

Call 0421 559 655 with offers/interest. Don't lowball, I'll hang up on yo ass and pretend I have bad reception.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...