Jump to content
SAU Community

Recommended Posts

As instructed ........

What is everyone's thoughts?

Just got my car tuned 703rwhp 524rwkw. Does anyone know the record for these turbos?
Built bottom end with 87mm pistons
2860-5 turbos
Pon cam type A
Tomei manifolds and dumps
Apexi down pipe
ID1000s and tomei fuel rail
2 walbro 400lph fuel pumps
Nismo inlet pipes and hard intercooler pipes
Custom intake pipes
AEM series 2 ecu tuned for flex fuel
4CA2765D-A61C-43E6-9DCF-9E05E902C893_zps

Edited by Jc052685
Link to comment
https://www.sau.com.au/forums/topic/463036-rb-2860-5-highest-hp/
Share on other sites

Simply a dual 2.5" Maf-less system I built for it. I am wishing now that I used 3" as I may have left a few hp on the table. I welded 2.5" v-bands to the turbo inlets as to minimize the inlet turbulence that a couplet could induce. Took care to make sure all inlet pipe fitment was perfect.

00000000-0000-0000-0000-0000000000ED_zpsA7AF15C8-183C-4845-B030-E13041C0BC9E_zps

I personally feel that if the customer wanted to truly max out the turbos by freeing up some restriction that still exists in the inlet & charge pipe sections that I could get another 25-35whp out of them. Car is still on the factory intercooler & intake plenum after all.

These are all the performance mods I can remember.

CP pistons 87mm

Eagle rods

N1 crank

Nismo oil pump

Mild head work

BC springs/retainers

Tomei type A poncams

2860-5 turbos

Tomei dumps

Tomei manifolds

Spec twin plate

AEM ecu tuned for flex fuel

Nismo thermostat

Apexi down pipe

Aluminum Radiator

ATI dampner

Blitz cat back

Greddy cooling panel

Greddy timing belt

ID1000 injectors

Tomei fuel rail

2x Walbro E85 fuel pump

Nismo air inlet pipes

Nismo intercooler hard pipes

Powerfab intakes

Splitfire coil packs

Got a pic of the cooler, Nismo is not factory and there is two versions with one being far superior to the other

Looking at the parts list I would say the exhaust and ID1000s are the most limiting factors and would guess a realistic 400-420rwkws and give or take 130-135mph

List says Nismo cooler, factory cooler starts to measurably pressure drop from around 350kw, 500+rwkw on a stock cooler is where I call mythbusted

Nismo intercooler hard pipes

Car made 490whp on 13psi...... Mustered a 507whp pull at about 15psi but the 93 octane pump gas was the limiting factor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...