Jump to content
SAU Community

Boost Controller


Recommended Posts

Assuming it in a 33..

Your mechanic probably installed it wrong because he doesnt know what he's doing. why would you let him do it if he hasn't got a clue....

can't go past 5psi, probably just running stock actuator pressure.

get your money back and go somewhere else or read the manual, should be fairly straight forward

Link to comment
Share on other sites

Well he is a mechanic that's why I'm pretty sure he did install it right just needs to bet set up it does work! Only on 5psi I tried to set it on 10psi and it switches back to 5psi I did read the manual tried to get it going but failed might give a auto electrician a call!

Link to comment
Share on other sites

did you check his installation of the solenoid with the manual? its easy to put something in backwards.

the stock actuator is 5psi, so its not working, if it was you'd be getting more.

if you can find someone local who knows anything about boost get them to have a look at it. any car meet or something should find you someone =)

  • Like 1
Link to comment
Share on other sites

Ok sklyn thanks for that I have not checked that! I'm assuming mechanics know this shit just to install a boost controller I did ask him if he knows how to install he said yes! Most mechanics should know FML not rocket science but I'll check thanks for that!

Link to comment
Share on other sites

Ok should I get auto electrician to check it or a turbo mechanic to check thanks for advice! Nizmo_Man

Not necessarily. Many "professionals" hate to admit what they don't know. Post your location up with your name and see if a local SAU member can have a look at it or they may point you to an RB knowledgeable workshop.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • It really doesn't matter much who made it, unless if is obviously poorly routed or restrictive in a section; what matters is the nominal cross section. For most normal-medium power you go 3" from the cat back for a good combination of free flow and retaining ground clearance. Front and dump pipes are tricker to get in larger sizes and are the most common restriction
    • Been poking around on the new to me car. I've determined that I have a Kakimoto exhaust from at least the downpipe back (I haven't confirmed the downpipe yet). It has a catalytic converter. Other than the company branding on the exhaust tip, I can only find one other marking. Behind the cat and under the car is a plate that has the numbers "NF307FP" and "M11111". Unfortunately, the Kakimoto website is written in Japanese and my browser won't translate it. I found that Nengun sells the brand, but my exhaust doesn't look like their current offering. They do indicate that each pipe is custom made, but I assume that's more of an inventory control thing than some sort of special, vehicle specific tuning. Anyone have a guess about what I have here? I'm getting ready to throw some dollars at tuning this car, but want to make good decisions. No reason to throw out a perfectly good exhaust system, if this thing will equal a full custom build.
    • Congrats on the progress. That's got to feel good to get the build done/mostly done. Now that you're this deep into it, I'm curious if you'd do it again versus finding a 5MT from the get go?
    • G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
×
×
  • Create New...