Jump to content
SAU Community

Recommended Posts

Hey guys,

Just after some advice on a new Exhaust Manifold I have come across.

So, soonish I am doing a Turbo upgrade (GTX3076R .82 Rear Housing) on my RB25DET R33 Skyline, I'll be changing the Exhaust Manifold too.

I was always going to go with 6Boost as everyone knows them, they do mint work and are reputable. However my friend has recently shown me an Exhaust Manifold by the name of CRG

I've never heard of them, but they do look decent and I know of one guy here in WA using one on an 800hp R32 and he said he can't fault it

Just wondering if anyone else has heard of them and can vouch for them?

Interestingly, 6Boost advised me they can't make the Manifold Twin-Scroll in the Low-Mount as the way the runners are made makes it not possible, however CRG have advised they can do it no issues.

6Boost:

- https://www.facebook.com/6boost-145583032160562/?fref=ts

CRG:

- https://www.facebook.com/CRG-Turbo-Manifolds-577702618920673/?fref=nf

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/463991-exhaust-manifolds-6boost-vs-crg/
Share on other sites

  • 2 weeks later...

for rb26 use?

I recommend RAW BROKERAGE. link below very good stuff

http://www.rawbrokerage.com/raw-brokerage-billet-twin-scroll-top-mount-turbo-manifold-rb20-rb25-rb26/

I have heard RawBrokerage is good though!
  • 2 weeks later...

for rb26 use?

I recommend RAW BROKERAGE. link below very good stuff

http://www.rawbrokerage.com/raw-brokerage-billet-twin-scroll-top-mount-turbo-manifold-rb20-rb25-rb26/

BW EFR 8374 DID NOT FIT IN R32 AT ALL. Serious hood clearance problems.

  • 3 weeks later...

make sure you get twin scroll, and get a twin scroll housing... worth every dollar, since you're still looking or a manifold... if you want to run a single gate, merge the pulses into a single gate like this (this from a JZ, but you get the idea):

1JZ-Twinscroll_single-Main_medium.jpg?v=

  • 2 weeks later...
  • 1 month later...

make sure that completely split Cyl 1~3 and 4~6.. what CRG usually do is have 1x merge collector (open scroll) and just put a twin scroll flange on top.. and at times they have 2x separate pipes going out merged into 1x pipe into 1x gate (which is correct).

Pretty sure it depends what you spec, but as you said if you have a fully divide 1-3 and 4-6 but then merge them before the flange with a single dump port that's a bit silly, they need to be separated from each-other by the gate in its closed position, if you have a manifold like the jz one depicted above it needs to have a diver plate down the middle to seat on the face of the gate.

That being said i belive a shop up in T'bar is doing a back to back test of the twin scroll with open single gate vs twin scroll with twin gate manifolds, so that should be interesting when they finish that

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
×
×
  • Create New...