Jump to content
SAU Community

Recommended Posts

Got told on FB group regarding this query, got told that nissan spark plugs are: PLFR5A-11

Can anyone confirm this is OEM?

Seems to be decently priced aswell

http://www.ebay.com.au/itm/6-x-Genuine-Spark-Plugs-For-NISSAN-PLFR5A-11-OR-22401-5M015-/222058100259?hash=item33b3b1b623%3Ag%3At7AAAOSwezVWzClK

Get yourself a copy of the 2007 g35 service manual - its listed in there.

The plugs you listed are 2 full steps hotter then OEM - Be careful.

I buy lots of things online, one I don't recommend is spark plugs. Received some once knocked up and in bad shape - had to send back.

Edited by Rufus007

Went onto the NGK website and found compatible spark plugs for the 350Z VQ35HR (same engine) and they recommended DF7H-11B, repco also recommended the same ones

Found some other link which stated LFR5AIX-11.

Still unsure which ones to purchase

  • 1 year later...

Bump for this thread.  We have a 3.5L 2007 v36 sedan skyline and looking for spark plugs

DE is regular and HR is direct injection (350z with VQ35HR)

Went to autobahn and there were two options NGK LFR5AIX-11 Irridium @ $25 each lasts 60k and Platinum PLFR5A-11 @ $33 each rated for 100k.  That last plug was to suit 03-07 Nissan 350Z.

Not sure which plug to go for ?

Cheaper one.

You will  probably sell the car before you need plugs again. That's what my crystal ball is telling me.

Otherwise the plug is the same gap and heat range . There is absolutely no way you would notice the difference.

  • Like 1
17 hours ago, R377 said:

DE is regular and HR is direct injection (350z with VQ35HR)

HR is not direct injected.

The direct injected engines end with a DD.  for example VQ30DD, VR30DDTT, MR16DDT, etc

Edited by sonicii
  • Like 1
20 hours ago, Ben C34 said:

Cheaper one.

You will  probably sell the car before you need plugs again. That's what my crystal ball is telling me.

Otherwise the plug is the same gap and heat range . There is absolutely no way you would notice the difference.

thanks for the reply - so both are correct fitting options ? Either would work ?  thanks

  • 1 month later...
On 4/7/2016 at 9:15 PM, Rufus007 said:

Factory OEM for vq35hr are Iridium - Denso FXE22HR11. Got mine from Nissan, they were $34 each though. Maintenance schedule on these is 170,000km but I recommend replacing earlier.

Confirmation from Fast....

5af03dd23b10d_sparkplugs.JPG.82d78bdf0cfef29384415f4be876fa9e.JPG

 

On 3/23/2018 at 8:46 PM, R377 said:

Bump for this thread.  We have a 3.5L 2007 v36 sedan skyline and looking for spark plugs

DE is regular and HR is direct injection (350z with VQ35HR)

Went to autobahn and there were two options NGK LFR5AIX-11 Irridium @ $25 each lasts 60k and Platinum PLFR5A-11 @ $33 each rated for 100k.  That last plug was to suit 03-07 Nissan 350Z.

Not sure which plug to go for ?

The PL and I guess the LF are for the DE engine which hav different plugs to the HR.

If for the HR motor I would be heading towards the DF7H-11B,  myself.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...